back to 5 road wheels... the fume extractor is in a differant place... and ck out again.. the BSG 20mm bulge..:550:0]

here's another scan,,,

check out the road wheels now... can you say... 1000 Road wheels GB ????

[View:/themes/fsm/utility/:550:0]

Gamera, I sent you a PM..

Manny,  I checked that issue, and scanned the page... here she is... other than the main gun and the 50 cal,, it makes no mention of the other parts used. also note.. the 5 road wheels..

 [View:/themes/fsm/utility/:550:0]

Been watching this the last few days and though I've never read the comics this looks cool as .

P38: I've got a bare chest and arms from Velinden's US Marines conversion set which are nicely molded but a little beefy - more like 1/32nd scale almost. If you can use them for Sgt. Rock send me a note. I doubt I'll ever use them.

 I Andy....you worry me....

Manny...I'm going to pull out of my colllection all the ones with the Jigsaw tank in it and review it.. starting with issue #150 ... Death of a Tank..  I'll capture some scans for posting...

Like Tim Gunn at Project Runway always say... "Make it work!"

I watch that TV show?  Well, my wife makes me to!

deafpanzer

Boy, it sounds like fun!  I recall seeing a shirtless US soldier somewhere... maybe it would be easier to start from there and add sleeveless shirt and ammo belts.  I will let you know if I see it again...

I always wanted to build Haunted Tank along with General Lee on a horse but it definitely will be the Stuart version... you are one real brave man!

p38jl

Manstein's revenge:

p38jl:

here is the "official" Spec sheet from DC comics....

[:550:0]

psst.. notice the "4" road wheels...

 

This may be the official spec sheet from the comic but this version is one I NEVER saw in any issue and I read about every one of 'em...

The issue that may be the most interesting for this build is the one where the crew goes to the depot after losing their "factory" tank in action and actually jig-saws the thing together...if I recall, they name the parts as they are cannibalizing them...

 

   Herr Field Marshall..  Its pretty close.. the main diff from the this "spec" and what we've read ,, is it has more than 4 road wheels( although they keep changing )... the turret sits more forward on the hull...I still have ALL my comics from my younger years.. and have all the issues from the Stuart to the end of the Jigsaw tank...(and untill the series was canceled)

 I'll scan some inside the mag pics for ya all to reminisce over later..

Manstein's revenge

p38jl:

here is the "official" Spec sheet from DC comics....

[:550:0]

psst.. notice the "4" road wheels...

 

This may be the official spec sheet from the comic but this version is one I NEVER saw in any issue and I read about every one of 'em...

The issue that may be the most interesting for this build is the one where the crew goes to the depot after losing their "factory" tank in action and actually jig-saws the thing together...if I recall, they name the parts as they are cannibalizing them...

 I'll scan some inside the mag pics for ya all to reminisce over later..

Boy, it sounds like fun!  I recall seeing a shirtless US soldier somewhere... maybe it would be easier to start from there and add sleeveless shirt and ammo belts.  I will let you know if I see it again...

I always wanted to build Haunted Tank along with General Lee on a horse but it definitely will be the Stuart version... you are one real brave man!

deafpanzer

There is no question it will be fun following your build.  I have taken the first row of the seat in your theater!  Sgt Rock and Haunted Tank were my favorite comic books when I grew up in early late 70's and 80's.  Great memories...

By any chance you are planning to include Sgt Rock figure too to this build?   It shouldn't be that hard, just rip the sleeves, build bigger arm muscles and wrap ammo belts around his neck.

p38jl

here is the "official" Spec sheet from DC comics....

[:550:0]

psst.. notice the "4" road wheels...

The issue that may be the most interesting for this build is the one where the crew goes to the depot after losing their "factory" tank in action and actually jig-saws the thing together...if I recall, they name the parts as they are cannibalizing them...

There is no question it will be fun following your build.  I have taken the first row of the seat in your theater!  Sgt Rock and Haunted Tank were my favorite comic books when I grew up in early late 70's and 80's.  Great memories...

By any chance you are planning to include Sgt Rock figure too to this build?   It shouldn't be that hard, just rip the sleeves, build bigger arm muscles and wrap ammo belts around his neck.

yup.. she has magicaly appearing and disapearing road wheels...lol

The wheels on the side there remind me of a Pz. 38.

here is the "official" Spec sheet from DC comics....

[:550:0]

psst.. notice the "4" road wheels...

T26E4

Other changes from issue to issue:

Sometimes the drive sprocket is in front, sometimes it's in the back

Jeb's commander's cupola varies back in forth from left of the main gun to right.

Shape and existence of the drivers' hatches

Muzzle brake shape

Engine deck configuration

 

But who can complain right? These were comic books, and not shop drawings.  All the more for the aspiring "Jigsaw Tank" builder to fiddle with.  The craziest thing is to settle on the eventual shape of the turret.  In some issues, it defies any known laws of physics -- almost an Escher drawing.

BTW: I recommend scratchbuilding the turret, not just dropping the Tamiya M41.  Also note the shortened hull (count the roadwheels) as opposed to an actual T-34.

(As you can tell, I've examined this project in some detail ... LOL )

 

Other changes from issue to issue:

Sometimes the drive sprocket is in front, sometimes it's in the back

Jeb's commander's cupola varies back in forth from left of the main gun to right.

Shape and existence of the drivers' hatches

Muzzle brake shape

Engine deck configuration

But who can complain right? These were comic books, and not shop drawings.  All the more for the aspiring "Jigsaw Tank" builder to fiddle with.  The craziest thing is to settle on the eventual shape of the turret.  In some issues, it defies any known laws of physics -- almost an Escher drawing.

BTW: I recommend scratchbuilding the turret, not just dropping the Tamiya M41.  Also note the shortened hull (count the roadwheels) as opposed to an actual T-34.

(As you can tell, I've examined this project in some detail ... LOL )

This is going to be interesting.

wow lots of changes from issue to issue. Looks like a creative project

wow lots of changes from issue to issue. Looks like a creative project

Here are a few pics of the comic covers,,, the first is the "death of the Haunted Tank".. the Stuart:550:0]

[:550:0]

[:550:0][:550:0][View:/themes/fsm/utility/:550:0]

you can see itss got odd features...

large bulge for the bow gun ( 20mm cannon )

M-10 type driver and gunner hull hatches

the drive wheels change from issue to issue,,

as does the main gun. and muzze break..

I am completely unfamiliar with this comic book series. Building their own "jigsaw" tank type story sounds interesting, I'll be checkin this thread out

Hercmech

Wow that is a lot of kits to make one model. Good luck on it...

ACESES5

What, did I miss something in the comic serices I was under the impression  the haunted tank was a Stewert tank.                   ACESES5                

Wow that is a lot of kits to make one model. Good luck on it...

What, did I miss something in the comic serices I was under the impression  the haunted tank was a Stewert tank.                   ACESES5                

I'm not 100% sure which T-34 base tank I will use yet.. and not sure about changing the drive wheels either.. I have all the comic books in the series from when they made the Jigsaw tank , untill they lost her.. so I plan on reviewing them again( for fun ) and to pick which details to portray in my build.

the gun muzzle changes often..

the drivers and bow machine gunner's hull hatches... appear and disapear...

the barrel length changes..

so.. I;'m going to research more.. and pick my features...

Same here, I intend to use an old Revell 1/40 scale T-34 hull as a base.

This is near the top of my "to do" list for 2012 as well.  Are you going to switch the drive sprocket and idler as per the diagrams?  And I'm sure you have seen, there are many features that appear and disappear from issue to issue. I think it'll be a lot of fun -- the pseudo T-34/Panther/M41 hybrid.