SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

NP drum kit in 1/12 scale WIP Update 8.28

19890 views
82 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2003
Posted by Jim Barton on Saturday, November 3, 2007 10:22 PM
 SteveM wrote:

Hi Jim- progress halted, but I've been thinking about getting back to it. I get so caught up in fine detail and making it as accurate as possible that it slows me to point of boredom. But I want to get back. Probably this week.

Thanks for asking, it is enough to inspire me into some action.

Steve 

Sounds like my model tornado chase vehicle. Sometimes I'll spend seemingly weeks on one or two small parts, especially something that requires a lot of filling and sanding, filling and sanding some more, filling and sanding some more, ad nauseum. More recently, it's a little camera tripod that's been giving me headaches.

 

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Sunday, October 28, 2007 11:53 AM

Hi Jim- progress halted, but I've been thinking about getting back to it. I get so caught up in fine detail and making it as accurate as possible that it slows me to point of boredom. But I want to get back. Probably this week.

Thanks for asking, it is enough to inspire me into some action.

Steve 

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    February 2003
Posted by Jim Barton on Saturday, October 27, 2007 10:21 PM
Anything new on the drums since I last went through the forums?

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    August 2007
Posted by ben1227 on Saturday, September 15, 2007 10:18 AM

Looks nice! What are you using to replicate the clear heads?

.:On the Bench:. Tamiya 1/72 M6A1-K
  • Member since
    February 2003
Posted by Jim Barton on Friday, September 14, 2007 11:27 PM

Well, SteveM, Rush are definitely still going strong! Their newest album, Snakes and Arrows almost topped the Billboard album chart a few months back and all the good seats sold out when Rush played Phoenix in July (an outdoor venue, too!). I managed to snag one of the precious few copies of Snakes... issued on vinyl (180-gram vinyl, at that!Thumbs Up [tup]), and although I was disappointed in much of the music (too many slow songs and structures that sounded alike), the opening cut "Far Cry" is a goodie, and as usual, Neil Peart always has interesting things to say.

Have you ever read Neil's books? He's had three published: Ghost Rider, a book about how he got over the tragic deaths of his daughter and first wife by riding around the country on a small motorcycle; Travelling Music: The Soundtrack to my Life and Times, about a trip to Big Bend National Park in Texas he took while driving a top of the line BMW sports car and the music he listened to, both in the car and while growing up (this one's become a "desert island" book for me) and Roadshow: Landscape With Drums, about the band's 2004 tour. All are excellent reads, although Ghost Rider, by the nature of its subject matter gets heavy and depressing at times.

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Sunday, September 9, 2007 8:20 AM
 Jim Barton wrote:

Great detail on those drums!Thumbs Up [tup]

I saw Rush about six weeks ago at the Cricket Pavilion here in Phoenix. This was the second time I had seen them, and although I thought they were better last time, they still put on a terrific show!

After you finish the drums, perhaps you can scratchbuild a model of Geddy Lee's keyboard equipment!Smile [:)]

Wow, now there's a project! That set up is a small fortress. I saw them over twenty years ago, it was unreal for me. I worshipped them as a younug teenager.

 

 

 

 

 

 

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    February 2003
Posted by Jim Barton on Saturday, September 8, 2007 11:51 PM

Great detail on those drums!Thumbs Up [tup]

I saw Rush about six weeks ago at the Cricket Pavilion here in Phoenix. This was the second time I had seen them, and although I thought they were better last time, they still put on a terrific show!

After you finish the drums, perhaps you can scratchbuild a model of Geddy Lee's keyboard equipment!Smile [:)]

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Tuesday, August 28, 2007 5:20 PM

More updates:

Ref shots

 

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Tuesday, August 28, 2007 4:13 PM
Thanks. Ringo's is in the lineup, he's my fave. But the paint job on that kit got me worried, thinking that Neil's was at least a solid color. And I want to do a really good job on that kit, so practicing all the elements X 4 will hopefully earn me the experience to do his up right.

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    May 2005
  • From: Left forever
Posted by Bgrigg on Tuesday, August 28, 2007 9:48 AM

Wow Steve, you're doing a great job.

I think I would have started off with Ringo's kit from the early Beatles day, but you pick your own battles, I guess!

I can't wait to see how your cymbals turn out. The symbols, too!

So long folks!

  • Member since
    October 2005
  • From: Warwick, RI
Posted by Kolschey on Tuesday, August 28, 2007 9:42 AM
Holy cow! Really nice work!

Krzysztof Mathews http://www.firstgearterritories.com

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Monday, August 27, 2007 6:53 AM

Thanks, guys. I'm gonna give vaccuforming a try for the cymbals. I really need to pick up my pace. I've been taking my time, measuring my own real drum stands, etc., because I don't want any of this to look out of scale. I have succeeded in making a snare drum stand and am pleased with the results. The hard part, if you look at the stands in the ref pic, is that all the legs are double braced. I'll send over a shot of the finished snare stand today, so you can see what I'm talking about.

SST- I might, if I could figure out how...Big Smile [:D]

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    May 2007
  • From: The Socialist Republik of California
Posted by Sic Semper Tyrannis! on Saturday, August 25, 2007 2:59 PM

First rate scratchbuilding! Send a finished pic of that to Mr. Peart. I'm sure he would appreciate it.

Cracked me up to see Neil do an animated cameo in the "Aqua Teen Hunger Force Movie".

SST

On the losing end of a wishbone, and I won't pretend not to mind. ----------------------------------------------------------- 1/35 Dragon SdKfz 251/1 sMG Various 1/35 Figures 1/35 Dragon Stug III Ausf B. (Balkans)
  • Member since
    March 2003
  • From: Newport News VA
Posted by Buddho on Saturday, August 25, 2007 1:30 PM

This is too cool, Steve....

Can you turn down brass rod on a lathe to make the cymbals?

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Monday, August 13, 2007 5:56 PM

 IanIsBored2000 wrote:
I was curious about the skins as well.  Also--when I asked about how you are going to do the symbols, it was not in fact a mis-spelling of cymbals, I was refering to the star inside of a circle symbols on the skins of the drums.  Cool [8D]  Guess I did learn a thing or two in school.

Ahhh, sorry Ian. Now it makes sense to me why you suggested the dude that custom makes decals.Dunce [D)] Well, I plan on making them with decal sheets, if I can find a clear image of them. So far, haven't found one. Currently, I'm more afraid of the cymbals than I am the symbolsBig Smile [:D]

The heads are gonna be made out of different shades of clear PVC, depending on the drum. 

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    August 2006
  • From: The Green "Mountains", Vermont
Posted by IanIsBored2000 on Monday, August 13, 2007 10:07 AM
I was curious about the skins as well.  Also--when I asked about how you are going to do the symbols, it was not in fact a mis-spelling of cymbals, I was refering to the star inside of a circle symbols on the skins of the drums.  Cool [8D]  Guess I did learn a thing or two in school.
"Scanlon: work your knobby hands on the table in front of you, constructing a make-beleive bomb to blow up a make-beleive world."
  • Member since
    November 2005
Posted by Anonymous on Monday, August 13, 2007 3:32 AM

 SteveM wrote:
Thanks, mf- if you look closely, you'll see that His Highness, Mr. Peart, had all his hardware (stands, rims, lugs, brackets) brass plated. So brass it is...but I'm so far away from painting that I've got time to think out how I'm gonna get it that shiney. Taking suggestions.

Steve

 

Actually it's "Gold Plated"

  • Member since
    January 2006
  • From: California
Posted by SprueOne on Sunday, August 12, 2007 11:01 PM
very impressive project. And unique subject too.
What about the opaque skins? paper? thin styrene sheet?

Anyone with a good car don't need to be justified - Hazel Motes

 

Iron Rails 2015 by Wayne Cassell Weekend Madness sprueone

  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Sunday, August 12, 2007 11:30 AM

Thanks, ya'llBig Smile [:D] Cymbals- that is going to be where I break new ground for myself. This is also where I want to make sure my fire insurance policy is up to date... I think it's gonna have to be vacuforming for cymbals. Have to research the how-tos.

Ian, the drum hoops are styrene channel strips  [  with the top rim carefully sliced off (if that's what yer asking about).

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    August 2006
  • From: The Green "Mountains", Vermont
Posted by IanIsBored2000 on Saturday, August 11, 2007 5:23 PM
That, my Texan friend, is incredible!  How did you do that metal ribbing on the outside of the drums?  And what's the plan for the symbols on the drums?  There used to be a post with a generous guy offering to make custom decals for anyone who needed them, mgiht be youre best bet.
"Scanlon: work your knobby hands on the table in front of you, constructing a make-beleive bomb to blow up a make-beleive world."
  • Member since
    August 2007
Posted by ben1227 on Saturday, August 11, 2007 4:59 PM

Nice! Neil Peart Big Smile [:D] Are you gonna scratchbuild his Paragon cymbols too?

.:On the Bench:. Tamiya 1/72 M6A1-K
  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Friday, August 10, 2007 3:07 PM
Thanks, mf- if you look closely, you'll see that His Highness, Mr. Peart, had all his hardware (stands, rims, lugs, brackets) brass plated. So brass it is...but I'm so far away from painting that I've got time to think out how I'm gonna get it that shiney. Taking suggestions.

Steve

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    March 2005
  • From: West Virginia, USA
Posted by mfsob on Friday, August 10, 2007 9:42 AM
Now that's some scratchbuilding! Looking good from the reference photo. What are you planning to use to get the chrome finish on the stands?
  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
NP drum kit in 1/12 scale WIP Update 8.28
Posted by SteveM on Thursday, August 9, 2007 10:21 PM

Here's what I've been working on lately...

 

A reference shot-

Haven't been a Rush fan in many years, but I grew up dreaming about this kit.

Comments most welcome 

Steve M.

On the workbench: ginormous Kharkov dio

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.