SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

To all Filipino Modelers

151426 views
2189 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2005
  • From: Manila, Philippines
Posted by zeke_ on Sunday, January 1, 2006 7:55 AM
what type of respirator do you use? i have the one that looks like a gas mask with a filter cartridge that can be replaced. and so far i don't smell the paint (acrylic or lacquer) when i use it while spraying. i'm from Las Pinas by the way, hope to bump into ya in one of those STC stores. there's also Accurate Model Works in SM Southmall if you happen to be in the area. Happy New Year everyone!!
  • Member since
    November 2005
Posted by Anonymous on Saturday, December 31, 2005 12:47 PM
 zeke_ wrote:
i haven't tried using a spray booth coz my room is my spray booth :D

mine too ^_^  i got quite dizzy the other week though from marathon spraying (tried painting two models at once to save time and paint) despite having a respirator and open room.  I'm spraying gunze sangyo acrylics thinned with alcohol by the way.

 zeke_ wrote:
but some of my friends say they use fans used for pc cases. i think those 120mm ones. i'm new also to modeling, started about 5 months ago. you live in the south? peace!

yep i heard that pc fans a quite good too, problem is i need ducting.  I already bought a masano exhaust fan with a duct port.  I'll try shooting some lacquer thinner into one of these days to see if it blows up ^_^.  I live in Paranaque, which is convinient since STC has two branches near my area.

Anyways a Happy New Year to you all.
  • Member since
    June 2005
  • From: Manila, Philippines
Posted by zeke_ on Thursday, December 29, 2005 5:42 PM
welcome to the FSM forums dude! i haven't tried using a spray booth coz my room is my spray booth :D but some of my friends say they use fans used for pc cases. i think those 120mm ones. i'm new also to modeling, started about 5 months ago. you live in the south? peace!
  • Member since
    November 2005
Hi, a question on spray booth blowers
Posted by Anonymous on Monday, December 26, 2005 11:09 AM
Hi,

    A Merry Christmas and a Happy New Year to all.  I'm kinda new to modeling having only started last month, trying out a tank and a couple of mecha.  I haven't finished any of them though, since i've been busy reading up on how to build stuff and carefully (well more like obsesively ^_^) trying to do things right.  I was pleasantly surprised to find out about this forum and that its well populated by Filipinos.

    I have a question for you people though with regards to spray booth blowers.  I've been looking around in hardware stores (southern Manila area) for them but all seem to be under powered when compared to the 100 to 200 cfm rating recommeneded (worse they have cubic meter per hour ratings).  Do any of you have suggestions or information on brands or places to buy satisfactory blowers / fans; or better yet have a setup you use which i can follow.  Thanks again.

  • Member since
    December 2003
Posted by jepot on Friday, December 9, 2005 1:10 AM

hmmm, its too quiet here...everybody must be enjoying watching the stuff displayed at the Nationals.

Man, you would have a headache watching all the beauties there, over 400 entries so I heard from one of the IPMS BA members....

Go there fellow Filipino modellers and enjoy the show!

  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Sunday, December 4, 2005 1:16 AM

hay nakow...   today is the last day of submission of pre registration forms...  can't submit.  was not able to finish my entry Sad [:(]

 

Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    November 2005
Posted by Anonymous on Friday, December 2, 2005 12:30 PM
four days to go...
  • Member since
    November 2005
Posted by Anonymous on Thursday, November 24, 2005 4:10 PM
...Just testing...
  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Wednesday, November 9, 2005 3:47 AM

hay nakow...  hayun...  my entry broke one of its legs.  i was so upset since a couple of weeks back.

i have been meaning to fix it but then, with it having something missing makes me lose my interest to finish it...

Sigh [sigh]

Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    April 2004
  • From: boot sector
Posted by cbrain on Thursday, November 3, 2005 4:30 AM
O ha..... so, how goes your entries, people? ehehehe.... ako? nada!

Big Smile [:D]
  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Thursday, October 27, 2005 10:25 PM
hey guys, IPMS Philippines Bert Anido Nationals entry form is now availbale at the website. pre-registration is also on-going. you can either submit the duplicate or email it to nationals@ipmsphilippines.com.

visit the webbie for more details.

thanks. Smile [:)]
Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Sunday, October 23, 2005 6:11 PM
zeke,

The tracks are a bit tight but you can force it to sag by pins planted at the side of the lower hull. I believe I used the hot screw driver technique.

  • Member since
    June 2005
  • From: Manila, Philippines
Posted by zeke_ on Sunday, October 23, 2005 7:35 AM
Dwight, galing ah. wanna ask if the tracks on the emil is long enough to make it sag? saka pano mo nadugtong yung tracks? nahirapan ako dun sa KV-1 e. thanks :) i have the emil na and the lav-25 piranha Big Smile [:D]
  • Member since
    November 2005
Posted by Anonymous on Thursday, October 20, 2005 4:40 PM
QUOTE: Originally posted by emjaetee
[mang ernie... how's your enry coming up?


Hi emjae

sloooow, looks like its only gonna be one...at least meron..heheBig Smile [:D]

how's yours?Tongue [:P]
  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Thursday, October 20, 2005 4:18 AM
Hey dwight... nice one you got there...

beth... why not join, indeed? it would be a blast, i bet...

mang ernie... how's your enry coming up?
Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, October 19, 2005 1:06 PM
Hello Beth

Don't be, more or less everyones working on something right? I am...
  • Member since
    November 2005
Posted by Anonymous on Friday, October 14, 2005 12:50 PM
QUOTE: Originally posted by rodbn20

beth

Tahimik nga, nakakabingi..naiintriga tuloy ako.heheheSmile [:)]


Rod

Eh, di mag ingay ka...hihihiEvil [}:)]
  • Member since
    November 2005
Posted by Anonymous on Thursday, October 13, 2005 1:10 PM
beth

Tahimik nga, nakakabingi..naiintriga tuloy ako.heheheSmile [:)]
  • Member since
    November 2005
Posted by Anonymous on Tuesday, October 11, 2005 1:06 PM
Yo!Tongue [:P] dwight nice apartment there!Big Smile [:D]

Geez, the silence is eerie guess everyones seriously busy with their entries,Shy [8)] i have some free time this month, might as well join in.Wink [;)]Approve [^]

  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Wednesday, October 5, 2005 12:42 AM


Well, this how my walking apartment looks so far. Big Smile [:D]







The tracks are on temporarily. I will fix them after I paint the lower hull and the road wheels.

I want to show the right side where I put some battle damage and broken track but the picture didn't turn out well.

More on this next week. Wink [;)]

  • Member since
    November 2005
Posted by Anonymous on Sunday, October 2, 2005 7:50 AM
only 64 days to go...
  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Monday, September 26, 2005 3:41 AM
Guys,

here are the categories for the Nationals in December:




Good luck, everyone!
Smile [:)]
Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    March 2004
  • From: Somewhere between near and far
Posted by emjaetee on Sunday, September 18, 2005 8:18 AM
hey guys! news flash!!! The schedule for the 2005 IPMS Philippines Bert Anido Nationals is out....

December 7 to 11, SM Atrium, Megamall Building A.

Will post details here as they come.

cheers!

Smile [:)]

Sali tayo!
Measure it with a micrometer. Mark it with a grease pencil. Cut it with an ax.
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 15, 2005 10:03 PM
QUOTE: Originally posted by mang ernie

Dwight

Nice build! I have to agree Revell's sailing ships are not that modeler friendly I have the Sta Ana and i gave up building it years ago.

Emjae

Malay mo, it got my attention.

Zeroinfrance

I agree with buck, the spraywork is good buy basically its practical and reliable once you get the hang of it it will serve you for years...mine is 11 yrs old and still works fine.



Many thanks.... ill start saving so i can buy one already!

ciao
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 15, 2005 1:37 PM
Tahimik....nakakatakot...heheheBig Smile [:D]
  • Member since
    November 2005
Posted by Anonymous on Friday, September 9, 2005 3:57 PM
Dwight

Nice build! I have to agree Revell's sailing ships are not that modeler friendly I have the Sta Ana and i gave up building it years ago.

Emjae

Malay mo, it got my attention.

Zeroinfrance

I agree with buck, the spraywork is good buy basically its practical and reliable once you get the hang of it it will serve you for years...mine is 11 yrs old and still works fine.
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 8, 2005 9:59 PM
QUOTE: Originally posted by allan

Dwight,

Thats fine shipbuilding you did on the Mayflower. Nice!

Zeroinfrance,

Hey, great to see you here too. The Sprayworks is a good set up. Complete pa and all you have to buy in addition is the coverter/adaptor (although Im not sure if the newer model still requires this). I used that for years and di ako nagsisi. It takes a while to get used to, but when you do, you can do a lot of things with it. Bigman's works are testament to this.

You might need some practice to perfect the preshading technique using the basic Sprayworks set. Same goes with fine, soft edged camo. But the trick is sa edges gawin mong malabnaw ang paint mix and spray the color demarcation lines repeatedly until you get a well-defined edge.

Hope this helps.





thanky you very much! Smile [:)]
  • Member since
    April 2004
  • From: boot sector
Posted by cbrain on Thursday, September 8, 2005 6:48 PM
QUOTE: Originally posted by emjaetee

QUOTE: Originally posted by cbrain

Looks like everybody's gearing up for the big one. Smile [:)] Might as well get busy na rin with mine. Big Smile [:D]

So, ano mga planned entries nyo? Tongue [:P]


you know what... i might get enough courage to prepare for this big one....

although... remember my gyan, kuya?



how about i enter this one? <ROTFLMAO>






Why not? Malay mo the judges will like it? Hodiba? Tongue [:P]
  • Member since
    June 2003
  • From: Cavite, Philippines
Posted by allan on Thursday, September 8, 2005 11:31 AM
Dwight,

Thats fine shipbuilding you did on the Mayflower. Nice!

Zeroinfrance,

Hey, great to see you here too. The Sprayworks is a good set up. Complete pa and all you have to buy in addition is the coverter/adaptor (although Im not sure if the newer model still requires this). I used that for years and di ako nagsisi. It takes a while to get used to, but when you do, you can do a lot of things with it. Bigman's works are testament to this.

You might need some practice to perfect the preshading technique using the basic Sprayworks set. Same goes with fine, soft edged camo. But the trick is sa edges gawin mong malabnaw ang paint mix and spray the color demarcation lines repeatedly until you get a well-defined edge.

Hope this helps.

No bucks, no Buck Rogers

  • Member since
    November 2005
Posted by Anonymous on Thursday, September 8, 2005 5:35 AM
mga sir... bago lang po ako d2 at medyo nahihirapan ako magsearch...
gus2 ko lang po sana humingi ng info tungkol sa tamiya basic sprayworks...
maganda na po ba gamitin un? at makakapag preshading po ba ako gamit un tamiya sprayworks? yun lang kasi ang kaya ng budget ko

salamat na marami
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.