SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/48 B-25 Group Build! All Invited to Join!

88102 views
308 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Wednesday, September 14, 2011 8:29 AM

p38jl

#3 works best for me.. using Testors paints.. Cuticle sticks work  very well to easier to handle...

Hey, what's a cuticle???? Whistling Wink

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    January 2003
  • From: Hancock, Me USA
Posted by p38jl on Wednesday, September 14, 2011 8:02 AM

#3 works best for me.. using Testors paints.. Cuticle sticks work  very well to easier to handle...

[Photobucket]

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Wednesday, September 14, 2011 8:01 AM

I could see that working with Tamiya acrylics. I've corrected small sections after airbrushing, never thought to try it with an entire section on purpose though. (I dipped the toothpick in some Windex to help the process) You need a flat/dull toothpick though to avoid scratching the clear parts though.

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    July 2011
  • From: Searcy, AR
Posted by icer22x on Wednesday, September 14, 2011 7:54 AM

I've tried method #3 with Tamiya. I was lazy and didn't want to set up the airbrush, so I brushed it on and still got pretty good results. I bet it would be a lot better with an even coat from airbrushing. They key is it must be totally dry or you'll smear the paint. I then dipped a toothpick in Future and went back over the clear plastic once all the paint had been removed. You might give it a try on the spare canopies that came with the Mitchell.

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Wednesday, September 14, 2011 7:01 AM

icer22x

What technique do you use to mask and paint the canopies WITHOUT scratch the plastic (if you cut tape)? I've tried a few methods:

1. Micromask - SUCKS - don't use it - waste of money

2. Tape the whole thing and cut off the areas to be painted. Sometimes leaves unwanted cuts in the plastic.

3. Paint over the whole canopy and use a toothpick to scrape away the unwanted paint. I've gotten the best results with this method. No scratches and you can get very detailed.

I usually use a high-quality painters' masking tape cut in thin strips for longer runs; cut in squares for corners & small panels. Once the tape is in place for the "borders" I fill in the middle with MicroMask. If there are a lot of frames I will sometimes spend a session masking + taping all in one direction, then spending another section doing the other direction. (Nobody ever said they had to all be done at once!)

Hutch - that is a beautifully done NMF! Cool

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    February 2003
  • From: Northern Virginia
Posted by hutchdh on Wednesday, September 14, 2011 6:36 AM

I usually use Tamiya tape to mask and use a brand new Xacto knife blade to lightly cut where need be.  My alternative is to purchase Eduard Masks when I can afford them.....

 

Hutch

Hutch

 On the Bench: 1:48 HobbyBoss Ta152-C; 1:48 & 1:72 Hasegawa F-104G NATO Bavaria

In queue: 1:48 Academy F-4B & a TBD Eric Hartmann bird

Recently completed: 1:32 Trumpeter P-51B

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Wednesday, September 14, 2011 5:53 AM

I freehand with occasional masks in the areas I'm painting..

As for your using method #3 with anything but Tempera...

 

  • Member since
    July 2011
  • From: Searcy, AR
Posted by icer22x on Wednesday, September 14, 2011 12:47 AM

What technique do you use to mask and paint the canopies WITHOUT scratch the plastic (if you cut tape)? I've tried a few methods:

1. Micromask - SUCKS - don't use it - waste of money

2. Tape the whole thing and cut off the areas to be painted. Sometimes leaves unwanted cuts in the plastic.

3. Paint over the whole canopy and use a toothpick to scrape away the unwanted paint. I've gotten the best results with this method. No scratches and you can get very detailed.

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Wednesday, September 14, 2011 12:21 AM

Shipwreck

 Reasoned:

 >>>it's really a shame the interior has the detail it does because SO much of it will never be seen!  Sure the canopy and nose (if it's the glass version) will be seen but otherwise not much of fuselage section.  <<<

 

 

Has anyone seen or tried a cut away on the J kit?

VanceCrozier

Hmm I keep looking at mine thinking about it - does that count!?

You too?

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    February 2003
  • From: Northern Virginia
Posted by hutchdh on Tuesday, September 13, 2011 7:48 PM

She's coming together.....

Hutch

 On the Bench: 1:48 HobbyBoss Ta152-C; 1:48 & 1:72 Hasegawa F-104G NATO Bavaria

In queue: 1:48 Academy F-4B & a TBD Eric Hartmann bird

Recently completed: 1:32 Trumpeter P-51B

  • Member since
    February 2003
  • From: Northern Virginia
Posted by hutchdh on Tuesday, September 13, 2011 7:48 PM

She's coming together.....

Hutch

 On the Bench: 1:48 HobbyBoss Ta152-C; 1:48 & 1:72 Hasegawa F-104G NATO Bavaria

In queue: 1:48 Academy F-4B & a TBD Eric Hartmann bird

Recently completed: 1:32 Trumpeter P-51B

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Tuesday, September 13, 2011 8:56 AM

Check that link, Icer..

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Tuesday, September 13, 2011 8:48 AM

Hmm I keep looking at mine thinking about it - does that count!?

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Tuesday, September 13, 2011 8:38 AM

Reasoned

 >>>it's really a shame the interior has the detail it does because SO much of it will never be seen!  Sure the canopy and nose (if it's the glass version) will be seen but otherwise not much of fuselage section.  <<<

 

Has anyone seen or tried a cut away on the J kit?

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Tuesday, September 13, 2011 7:16 AM

Reasoned

Vance, I've said it before, it's really a shame the interior has the detail it does because SO much of it will never be seen!  Sure the canopy and nose (if it's the glass version) will be seen but otherwise not much of fuselage section.  I will attempt to attach a group build attachment that has several takes on this kit, some actually painted it Yellow Chromate, while others Green.  Check out the "Terry Miesle" build.

http://modelingmadness.com/reviews/allies/us/usaaf/48b25.htm

 

Thanks for the link! Yep, I think I'll leave the fuselage interior as-is & expect to green it up a little with the wash. The brighter yellow ZC may allow a little more to be visible than the green ZC anyway. I think I do want to have the greener shade on the cockpit & tail gunner's area, as he did in that build review you noted.

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    July 2011
  • From: Searcy, AR
Posted by icer22x on Monday, September 12, 2011 8:50 PM

The instructions say the interior is olive green. How accurate is this?

Also, on the back of each nacelle, there are two antennas? Most finished kits I see of these Js, they are sanded off. Why is this?

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Monday, September 12, 2011 2:45 PM

Vance, I've said it before, it's really a shame the interior has the detail it does because SO much of it will never be seen!  Sure the canopy and nose (if it's the glass version) will be seen but otherwise not much of fuselage section.  I will attempt to attach a group build attachment that has several takes on this kit, some actually painted it Yellow Chromate, while others Green.  Check out the "Terry Miesle" build.

http://modelingmadness.com/reviews/allies/us/usaaf/48b25.htm

 

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Monday, September 12, 2011 8:00 AM

The cat was stolen... or was retrieved by his handler after years of spying on your operation?!?!

Reasoned - I'm using enamels inside as I prefer them for brush painting and I am indeed using the yellow ZC. (the "local" didn't have the green in stock) To be honest I was thinking "how yellow could it be?!", so I'll either mix it greener for the top coat, or a wash with a great deal of green in it. I didn't touch the cockpit areas yet. I wonder if a few drops of blue will green it up enough? Hmm

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    January 2003
  • From: Hancock, Me USA
Posted by p38jl on Monday, September 12, 2011 7:34 AM

Cats...Whistling

[Photobucket]

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Sunday, September 11, 2011 7:07 PM

Actually, someone stole him... He used to sit out front of our apartment, "guarding HIS hallway"and he really loved EVERYbody that would come by.. Guess someone thought that that meant they could keep him...

Hope he wrecked their house...

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Sunday, September 11, 2011 2:05 PM

Hans von Hammer

But the cat had other ideas...

 

What a shame.  Curious, was that its' 9th life or did you relent? Smile

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Sunday, September 11, 2011 11:08 AM

I plan on doing the dio still.. It's too good an idea to not.. I'm stupid with 1/48 Monogram Forts .. Think I have four, plus the Revell "F"...

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Sunday, September 11, 2011 11:06 AM

Well, it had crash-landed in Scotland, where it was about to be salvaged... However, a 9-lb tomcat named Chewy destroyed for good, forcing it into a power-off dive from the top shelf in the War Room to the floor before I could finish the diorama...

The diorama was one of my "behind the scenes" stories... The USAAF in England had Aircraft Recovery Teams that would go about the British Homeland in search of crippled bombers and fighters that had made it back to England, but not to a base...

Once they located an aircraft, they would survey it and determine if the aircraft was repairable or needed to be scrapped.   If it was deemed repairable, and there was sufficient room for a take-off, they'd get it back into nominal flying condition, and sky it back to a base for further repairs.  In this case, they determined that the aircraft was flyable if it had a couple of engines changed out and some flight-control damage repaired...

On the diorama, I also had a couple of Tamiya 2 1/2 ton trucks planned, as well as a towed air compressor, portable engine hoist, and team tent (This mission would take a few days to accomplish, so they need a place to live).  The teams first priority was to get the big bomber back on its wheels. 

They'd have pushed/pulled inflatable rubber jacks under the wings using the air compressor to inflate them, which would raise the Fort up high enough to get the wheels down.  Then the engine change could begin.  This was the "action" I had planned...

But the cat had other ideas...

 

 

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Sunday, September 11, 2011 7:48 AM

Hans von Hammer

Yeah, that tail pic is Shep's.. The bottom pic is my (now destroyed) B-17..

Why "destroyed", I thought it looked cool w/ladder and parted out stripping.  Was that the theme?

BTW, hope to have some pix by tonight of an almost complete 25...... with any luck.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Sunday, September 11, 2011 12:35 AM

Yeah, that tail pic is Shep's.. The bottom pic is my (now destroyed) B-17..

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Saturday, September 10, 2011 7:47 AM

CallSignOWL

 Reasoned:

 

 Hans von Hammer:

 

 

 

 

http://img.photobucket.com/albums/v233/HansvonHammer/Screenshots/Models/B17/b17g_4-a.jpg

 

 

 

Indifferent   Wow!  I had never seen that before, that looks awesomeBeer.  Was that inspired by a specific photograph?  I have seen pix of 17's making it back chewed up by flak or fighter canon, your's looks VERY real.

 

thats not Hans' dio, that one belongs to Shep Paine:

http://sheperdpaine.com/monogram/B-17_sheet.pdf

Thanks Owl Embarrassed (learn something new everyday) , that is some very impressive work, I can hand it to builders who not only build skillfully..... but create. 

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    January 2010
  • From: Nebraska, USA
Posted by CallSignOWL on Saturday, September 10, 2011 7:19 AM

Reasoned

 

 Hans von Hammer:

 

 

 

 

http://img.photobucket.com/albums/v233/HansvonHammer/Screenshots/Models/B17/b17g_4-a.jpg

 

 

 

Indifferent   Wow!  I had never seen that before, that looks awesomeBeer.  Was that inspired by a specific photograph?  I have seen pix of 17's making it back chewed up by flak or fighter canon, your's looks VERY real.

thats not Hans' dio, that one belongs to Shep Paine:

http://sheperdpaine.com/monogram/B-17_sheet.pdf

------------------------

Now that I'm here, where am I??

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Friday, September 9, 2011 10:33 PM

Hans von Hammer

 

http://img.photobucket.com/albums/v233/HansvonHammer/Screenshots/Models/B17/b17g_4-a.jpg

 

Indifferent   Wow!  I had never seen that before, that looks awesomeBeer.  Was that inspired by a specific photograph?  I have seen pix of 17's making it back chewed up by flak or fighter canon, your's looks VERY real.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Friday, September 9, 2011 6:17 PM

Have you ever used "battle-damage", "sheet-metal touch ups" as an explanation to the rivet counters at a contest?

No... I only enter dioramas, so I glue on little strips of .010 styrene, then sand them down even thinner to represent the patches, then paint then a different shade of the base color, depicting "new paint", as Shep Piane did on his B-17 diorama.

I figure even the densest rivet-counter can understand that much... And they ain't so bright as to know where EVERY stencil is on EVERY plane...

 

I also use parts form "newer" planes to depict the repairs..

 

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Friday, September 9, 2011 2:53 PM

VanceCrozier

I had a few minutes last night, didn't want the hassle of setting up & tearing down the a/b so I brush painted the interior of the fuselage with good ol' Testor's Zinc Chromate. Looks too yellow to me though, I'll have to add some green to the wash I'll be doing.

Vance, as you may know, not sure you're using acryilic or enamel but testors enamel makes a

green zinc chromate

 

and yellow zc              

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.