SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

The Official 1942 70th Anniversary Group Build

78945 views
567 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, October 1, 2012 6:38 PM

During the weekend I glued the fuselage halves together and installed the rear cockpit decking and gunner's turret

Then it was time for seam clean up today. Since the real TBD had overlapping skin panels and this kit has raised panel line details, I decided to try a new technique here. First I used a needle file along the trailing edge of each cross fuselage panel lines to create an overlapping effect. Then I used my sanding sticks to smooth out the seams on each panel.

since there were none of those panel lines on the forward fuselage, all I had to do was scribe in a filler cap that would be lost, and then sand the gluing seam smooth.

and then clean up the vertical stabilizer and rudder seam in the usual way. How it looks overall now...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, September 28, 2012 12:45 PM

Thank you sir. I am having fun and getting quite a few flashbacks building this old beauty.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Friday, September 28, 2012 9:30 AM

Nice progress, Stik.  It's looking  really good.

 

 

 

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, September 27, 2012 10:11 PM

Lots of progress on my TBD today. Based off of some photo interpreting that I have done, it appears that some TBDs had the rear cockpit decking painted in Blue Gray, so I did that with mine today.

and since it would be easier to paint certain areas of the fuselage in the same color at this time prior to installing some windows rather than masking off the windows after installation and painting the surrounding areas later, I did that. I mixed up more paint than needed for what I intended, so I painted both fuselage sides. I had also tacked the access panels in place to mask off the green areas there.

Then it was time to glue the engine into the cowling

Glue the side windows into the forward fuselage

then seam clean up on the outer wing panels with a needle file... talk about a challenge...Surprise

And finally I used ProModeler USN instrument decals on the front and rear IPs using some good reference photos I had to get the look right.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, September 27, 2012 12:21 AM

Thank you sir. I am so wanting to do this TBD right.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2012
  • From: Milford, Ohio
Posted by Old Ordie on Wednesday, September 26, 2012 2:24 PM

stik - Nice examples of how a wash makes the details pop (especially that engine).

Yes

Flight deck:  Hasegawa 1:48 P-40E; Tamiya 1:48 A6M2 N Type 2 ('Rufe')

Elevators:  Airfix 1:72 Grumman Duck; AM 1:72 F-4J

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, September 26, 2012 12:48 PM

Thank you Sub. I am already getting ideas to dress up the cockpit for the other TBD that I have in my stash.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Wednesday, September 26, 2012 5:47 AM

Looking good! Very nice detail work, and I especially like the floor! Looks great!

NEW SIG

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, September 26, 2012 12:03 AM

As I said last week, my goal for this week was detail painting and washes. Along with some dry brushing.

Engine with the basic colors, and then washed

fuselage sidewalls

nose area

front cockpit

rear cockpit

close up of the gunner's floor area

gunner's "turret"

and the last odds & ends green parts for the cockpit & nose

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, September 19, 2012 8:02 PM

I am just starting to get my steam building here... too much family stuff getting in the way of bench time on my days off. As far as work, its just the time of year and the schedule... it will quite down soon for me a bit when the weather cools off.

Today's progress on my TBD was just getting Interior Green airbrushed on... all over...

Next week on my days off I will get the detail painting done along with some washes and drybrushing...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Wednesday, September 19, 2012 3:26 AM

Good to still have you with us Stik! I'm having issues with work right now too, so I totally get it.

NEW SIG

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, September 18, 2012 7:01 PM

Well last week on my days off I was laid low by some illness, and in the mornings here before work afterwards were not conducive to modeling due to 1) having to work late most every nite this past work week, and 2) it was too damn hot in my work area with this heat we have been having this past week which cooled off a bit on Sunday.... But, this did lead to a strong desire to get some model building done on my days off this week for me. So I was able to get some work done on my TBD today. First up I airbrushed on a primer coat of Tamiya Surface Primer thinned with generic lacquer thinner on all areas that will be interior green. And the Instrument Panel for good measure...Wink

And I airbrushed on a coat of MM Acrylic Steel on the engine.

Tomorrow I plan on getting the interior green and other colors airbrushed on.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Monday, September 17, 2012 3:59 AM

Good to see you guys are still around! I understand life happens. I have certainly disapeared off the radar a few times...

NEW SIG

  • Member since
    May 2012
  • From: Japan
Posted by Frightful6_7 on Sunday, September 16, 2012 4:09 PM

 Sorry sub, I am still here but I have been having camera and CPU problems, my cpu got a virus and needed to be fixed.

http://i852.photobucket.com/albums/ab85/Tempest977/Rising%20Sun%20Group%20Build/zero1-2-1-2.jpg

  • Member since
    August 2011
  • From: Variable
Posted by Lt. Smash on Saturday, September 15, 2012 2:46 PM

sub, One of your two tank builders is still here!  I'm painting the Sherman.  Well, cursing and painting the Sherman to be exact. I had trouble masking my camouflage, twice!  I hope to have an update by the end of the weekend with pictures.

On the bench:  Tasca M4A1 Sherman (Direct Vision Type)

Build Log: www.ltsmashsmodels.com

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, September 14, 2012 3:14 PM

I could do an easy (Tamiya) tank kit, if my hands were not so full already.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    August 2005
  • From: Los Angeles, CA
Posted by corvettemike on Friday, September 14, 2012 6:05 AM

sub revolution

BTW, where did our two tank builders run off too? Our group is very aircraft heavy!

I can always toss in my DML El Alemein Sherman Mk. III as a late 2nd build. We'll see I'm on hiatus until the end of the month and it depends if I find a decent Tiger at Modelfest in which case I'm jumping in to tigerman's steel cats GB.

Rise my brothers we are blessed by steel in my sword I trust...

Arm yourselves the truth shall be revealed In my sword I trust...

Havoc Models

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Friday, September 14, 2012 5:27 AM

Cool! It's different, and I like it!

And thanks for the info about the roundels in the Pacific, I never knew that!

Thanks, Budd

NEW SIG

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, September 13, 2012 1:22 PM

sub - there are 4 decal options in the kit, the box art illustrates a RAF Spitfire in the Pacific, hence the deletion of the red center in the roundel.  

Being a Canadian, I'll be cobbling together markings for one of Beurling's mounts which he flew during the siege of Malta.  It will be one of the more skeptical schemes:  tropical colours but with the stone section oversprayed with EDSG.  Something like this:

regards,

Jack

  • Member since
    September 2009
  • From: Guam
Posted by sub revolution on Thursday, September 13, 2012 4:28 AM

Excellent work, Chris and Mike! Great to see the histories behind both aircraft. I always like to get a book about the particular plane I am building, not neccesarily to make the build more accurate (though sometimes it happens) as much as just to read up about it and get inspired. And Chris, it's also great to see a personnal story behind a model too. Every model should have two stories, the historic one, and the personal one.

Geratic, updated your build. It's only natural to have you add a Spit for us, and that's a neat looking one! Is that Greek markings on it?

Our little group sort of turned into a Spitfre GB, huh? :)

BTW, where did our two tank builders run off too? Our group is very aircraft heavy!

Thanks, Budd

NEW SIG

  • Member since
    October 2008
  • From: italy
Posted by bsyamato on Tuesday, September 11, 2012 4:51 PM

Nice Spits Mike & Chris  !!

Will read the histories tomorrow Sad

Jack i'm really curious about a short-run Spit

  • Member since
    February 2011
  • From: Ontario, Canada
Posted by gunner_chris on Tuesday, September 11, 2012 2:12 PM

Ummmmm yea that's just a slight oversight......

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Tuesday, September 11, 2012 12:18 PM

You can never have too many Spitfires in the stash.  Good work guys, and I too enjoyed reading the history behind the builds, (as well as Old Ordie and his excellant Dauntless build).  I noticed one of the aircraft, DB-X didn't have the canopy frame painted - not sure if an oversight or ... ?


I think I will be adding to the Spit pool with a Sword kit in 1/72 scale, a tropicalized Vc.

regards,

Jack

  • Member since
    February 2011
  • From: Ontario, Canada
Posted by gunner_chris on Monday, September 10, 2012 10:21 PM

I think half of the enjoyment came from the research.

Really gave the build some meaning.

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Monday, September 10, 2012 6:00 PM

I love Spitfires.  Both of you have done an outstanding job with yours.  

Really nice to see.

 

 

 

 

  • Member since
    May 2012
  • From: Milford, Ohio
Posted by Old Ordie on Monday, September 10, 2012 2:29 PM

gunner_chris and corvettemike - Great Spitfires!  YesYes

Thanks for the history behind your builds - it brings so much to the experience.  I especially like a good story to go with a scale model.  Salute!

Flight deck:  Hasegawa 1:48 P-40E; Tamiya 1:48 A6M2 N Type 2 ('Rufe')

Elevators:  Airfix 1:72 Grumman Duck; AM 1:72 F-4J

  • Member since
    February 2011
  • From: Ontario, Canada
Posted by gunner_chris on Monday, September 10, 2012 7:49 AM

And well done in your spit Mike.

Looks great!

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Monday, September 10, 2012 5:25 AM

Nice brace of Spitfires Chris. I enjoyed the tail of NK-K in particular. I was one who built the 1/72 Revell kit as a kid, having been given it by my father one Christmas. It might have been about 1977 I'm guessing.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, September 10, 2012 5:17 AM

Nice pair of Spits! I was wondering about the early war scheme in 1942, but it appears that that particular Spit soldiered on in its original colors. Nice.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    August 2005
  • From: Los Angeles, CA
Posted by corvettemike on Monday, September 10, 2012 4:32 AM

Great looking spit Chris!

My Spitfire is done as well...

The story of P8088

More history can be found here: http://www.spitfires.talktalk.net/A7_Specials/Spitfire_MK_IIa.html

The Spitfire in question is P8088, a Mk. IIa manufactured at the Castle Bromwich Aeroplane Factory, and donated in January 1941 by the Borough of Lambeth Spitfire Fund. This machine, carrying letters NK-K, an inscription “BOROUGH OF LAMBETH” together with a personal ‘Just Jake’ nose art of P/O Alec Lumsden, arguably ranked as one of the more colourful of the early Sptifires. It became popular with many young modellers of the 1960s when its markings were carried over to the mass-produced 1/72 Revell kit of the Spitfire. This model was since followed by many, including a recent 1/18th version made by 21st Century Models. Microsoft Combat simulator also has a version of NK-K which has been beautifully recreated for computer gaming.

The original aircraft was donated in January 1941 by the Borough of Lambeth Spitfire Fund. There was talk that it would be called the Lambeth Walk after the popular song of the same name but in the end, the more austere name ‘Borough of Lambeth’ was chosen.

P8088 was dispatched for service in February 1941, being taken on charge with 39 Maintenance Unit, Colerne on 1st March 1941 with serial number P8088. From Colerne, P8088 was delivered for active service on 21st March 1941 to No. 66 Squadron stationed in Exeter.

On the 9th April, 1941, the aircraft taken over by No. 118 Squadron at Ibsley where it was given the call sign NK-K. While stationed at Ibsley it was flown by the well known wartime pilot and civilian author P/O Alec Lumsden. It was Lumsden who attributed the nose art depicting Captain A.R.P Reilly-Ffoull (Really Foul), a character from the wartime cartoon strip ‘Just Jake’ and featuring ‘Jane’, a young lady who was forever losing items of her clothing. ‘Just Jake’ ran for 14 years in the Daily Mirror newspaper from 1938 and was drawn by Bernard Graddon.

It is also mentioned that on the 18th April, Lumsden added the name of his girlfriend, Bette, to the door of P8088. No red tape or time wasted back in those days! In Alec Lumsden’s Pilots Log Book, records indicate the exact dates when the nose art and the name Bette were added to the Spitfire. On 16th April 1941, The ‘Borough of Lambeth’ was painted and on the 17th April, he received a telegram from Bette saying “Good luck to Bette the Spitfire”.

After its four month service with Ibsley, NK-K passed to another airfield, Middle Wallop, Stockbridge, Hampshire on 6th July 1941 and then was assigned to No. 152 (Hyderabad) Squadron at Portreath, Cornwall. On the 27th August that same year, the same aircraft moved to No. 19 Squadron at Perranporth, Cornwall as part of an emergency detachment of Spitfires from Matlask, Norfolk.

There, on the 31st August, P8088 suffered an engine failure on a night landing at Matlask. It overshot, ran through a barbed wire fence and tipped onto its nose, fortunately without injury to Pilot Officer N.D.O. Devereux.

P8088 was taken to Exeter for repairs on the 7th September 1941 and was ready for collection by the 16th May, 1942. She was then flown to 33 Maintenance Unit, Lyneham on 3rd June 1942.

On the 21st September that year, P8088 was issued to 61 Operational Training Unit, Rednal and on 19th May 1943 she sadly suffered Category B damage (Beyond repair on site, i.e. repairable at a Maintenance Unit or at a contractor’s works) when Pilot Officer J.H. Gielstrup (Danish) stalled when landing after the engine failed, collapsing the undercarriage on impact.

By the 17th July, P8088 was repaired and went into storage at 6 Maintenance Unit, Brize Norton on 19th July. On the 1st August she was then passed to Central Gunnery School, Catfoss. 22nd February 1944 saw NK-K taken to Heston Aircraft Co., Heston Aerodrome for repairs and was ready for collection on the 26th May, 1944 and delivered to 9 Maintenance Unit on the 14th June. The 1st July, saw P8088 allotted again to 61 Operational Training Unit and on 16th September, 1944, NK-K crashed into the ground at Lower Heath Coppice, Prees, Shropshire, killing Flight Sergeant John Cashel Barry RAAF, 22 years old from Wahroonga, New South Wales, Australia. He was buried in Chester Regional Cemetery.

In 1944/45, P8088 was recovered by Cosford recovery team and stored for spares and scrappage. In 1978, further parts were recovered from the crash site by the Wartime Aircraft Recovery Group, Heritage Aircraft group. The remains were then passed on to Ibsley museum, Ringwood, Hampshire and displayed. The museum was closed down in the mid 1980′s and the Spitfire display and boxed remains subsequently passed to a collector and ex-Cosford recovery team member, Mr Harrington, who then put it into storage.

Over recent years NK-K has attended a number of events allowing a large number of people to enjoy it, sit in it, as well as generate some revenue for charity organisations.

The model

Revell 1/48 Spitfire Mk. II call letters NK-K "Bette' as she would have appeared around 21'st September 1942 with the 61 Operational Training Unit. Though the nose art and "Bette' name were associated with Alec Lumsden they were not removed after the craft was no longer piloted by Lumsden as seen in this image of the remains from 2008

And here is my finished build

Rise my brothers we are blessed by steel in my sword I trust...

Arm yourselves the truth shall be revealed In my sword I trust...

Havoc Models

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.