The First Gulf War 30th Anniversary Build

I finally got a little bench time...I had a Cubscouts counsel meeting via zoom, so I was able to get some work done on some of the seams, and continue a few assembly steps.

I used a two step process (where necessary) of home made 'sprue goo' and Perfect Plastic Putty to fill the seams on the intake sides that are virtually invisible once the cockpit assembly is installed, and totally forgot to take a photo before priming and then installing the cockpit!

I was also able to get the upper wings installed last night too...

I am still waiting for my resin pilot in the ejection seat, which is somewhere between here and Scottsdale Arizona, and a set of resin exhaust cans, which are somewhere between here and Maryland.  (Here is the suburbs of Philly....)

Looks good Justin. I hate those seams.

Continuing on...Using the KMC (True Details) cockpit in this one. It paints up pretty nice, I'm also adding the ECS duct in the tail...a sore spot of this kit for sure. Just some Evergreen tube, bent. The excess will be cut off and everyhting shaped into place.

Sure, Dan.  I have you down and thanks for joining!

Nice work so far all!

First WIP pics on the M-60A1; so far so good, everything's going together well:

Hello everybody!

Justin - nice lookin' F-15. Long time ago I have built a similar (or maybe even the same) kit, by Monogram.

Whitey - That S-3 (Hoover) is very interesting and you don't see it built too often. The new cockpit is looking very good.

Armor_Aficionado - Good to see a classic tank here. Did you see we had a thread here where we were trying to 3D-design an interior for it?

http://cs.finescale.com/fsm/modeling_subjects/f/3/t/180795.aspx

And I have managed to paint up the PASGT (kevlar) vest and it's woodland camo pattern:

In the other build thread we've had a discussion about how Verlinden made some errors in regard to the things that should from the pistol belt like the pistol holster or the canteen(s). I'll try to correct those errors, but first I want to paint up the boots.

Thanks for lookin' and have a nice day!

Paweł

Hey gang, I decided to get started on my AH-1J. My plan is to build it in the 3 gray camo scheme used during Desert Storm.  I want to eventually build every version of the Cobra that served with the Marines. This will be the second of the series. I finished a kit-bashed -1G in '19 and the 4-bladed demstrator last year. I purchased the Cobra Company resin cockpits for the the J, T, and W for my project. I decided to go ahead and use the resin for this build. 

I have never used a resin cockpit before. My experience with resin hadn't extended beyond an ejection seat here or a set of wheels there. Overall, I'm happy with the way it turned out. There are a few little mistakes, but they really won't be noticeable under the canopy. The only addition I made was a pair of scratch built ECS hoses.

I'm ready to move on to the airframe. I'll be sharing my progress as I make it. Comments, questions and criticisms welcome. Thanks for looking!

-O

Nice progress AA on the M60!

Well done on the cockpit O!

I was able to get a little more finished on my F-15C this weekend!  Took care of the seam where the cockpit assembly mounts to the fueslage, and found that the speed brake panel had the mount tabs (?) broken off, so I started to fill them in with sprue goo...

I am at sort of a standstill until the resin exhaust cans and pilot/ejection seat get delivered by the ultimate USPS....

I also ordered the markings, a decal set from Ebay as well.  I hope they dont take too long to get here!

Justin - looking at those seams reminds me of why my F15 is on a 15 year hiatus.   Looking good so far!

First coat of paint on:

Hello!

I have painted the boots for the captain. Added the ankle reinforcement straps - made them out of a tea bag:

Thanks for lookin' and have a nice day

Paweł

Those boots look like they were made for walking!  

AA, nice progress!

Waiting for some A/M components, coupled with a Bout of shingles, has put a pause on my build time...one would think a week off of work would be a blessing...

Keyserj: The M1A1 is coming along great.

Justinryan215: F-15 looks great, I remember build this kit back in the day.

Pawel: Excellent painting on your figure.

Armor Aficionado: Nice desert yellow paint job, on your M-60 A1

Oortiz10: Nice detailing on the resin cockpit.

Whitey: Great detail painting on the cockpit and panels.

Work has been sort of slow on the F-117, so far the part fit has been excellent.

IMG_2372 by Daniel Smith, on Flickr

Kit comes with a counter weight.

IMG_2373 by Daniel Smith, on Flickr

Bomb bay glued in.

Last year on my Revell C-54 I started masking the clear parts before glueing them in to help prevent glue residue.

IMG_2374 by Daniel Smith, on Flickr

I plan to have the canopy open with the ladder attached. 

IMG_2377 by Daniel Smith, on Flickr

Hey gang, wow, there's some great work going on in here! I'm always impressed by your talent and skill. Very inspiring! Pushes me to be a better modeler myself. 

So I've been able to make a little progress on my Cobra. Last I left you, I had the cockpit built up and ready for the next step. Well, the next step was to install it.

The resin cockpit was a bit of a challenge because I had to do some grinding to get the resin to fit. Also, there are no locating tabs so I had to do some careful measuring and comparing to an AH-1G I'm concurrently building.to get it pretty close. Well, as close as I could. Something you don't see in the above are the armor plates. I added them after I took the photo but before I closed up the canopy.

Speaking of canopies, I got both the canopy masked up and installed. Again, there are two because I'm also kitbashing an Army AH-1G.

Shortcomings of kit are the intake and exhaust assemblies. The intakes are molded as hollow openings that allow a viewer to see into the empty doghouse.

I'll have to figure out a solution for that. The exhausts are just these two shallow ovals molded onto a piece that mounts to the rear of the doghouse. I pressed some tissue soaked in white glue into the shallows to mold some FOD covers. A small hole drilled into the backing of the exhaust allowed me to push them out after they dried.

The last thing I did was attach the rotor blades to the hub. When I kitbashed a USMC -1G, I found that the assembly was very weak and allowed for a lot of flexing. So much so that I accidentally snapped a blade off during construction. This time I used a couple of small styrene strips to add some rigidity and reinforce the joint. I'm sure once everything is painted up and washed, the extra plastic won't be noticeable.

So the main fuselage is assembled. Next will be to clean up all the joints and fill the gaps around the canopies. After that, I think things will go pretty quickly. 

Thanks for looking. Feel free to share any comments, questions or criticisms. I hope to be back soon with more progress.

Cheers!

-O

Everyone's builds are looking great.

Construction is done on the m1a1 and it is now ready for paint. It is looking like a snow storm is coming to start off the week Monday so I might try to do some spray painting before the weekend ends.

Good looking stuff here!

Everyone's builds are looking great. 

Nice progress so far, GreySnake.    

Interesting that Tamiya left those big open areas in their design that you are covering with the styrene.  

Oortiz10: Great work on the Crobra.

Keyserj: M1A1 is looking great.

GreySnake: Nice start to the Challenger, I remember Tamiya's 1/35 Panther from the 1970's had large gaps above the wheels.

After finishing work in to cockpit tube, I glued the two half's together. 

IMG_3034 by Daniel Smith, on Flickr

After that it was ready for a base coat of Tamiya XF-66 Light Grey

IMG_3039 by Daniel Smith, on Flickr

Then on to Tamiya XF-1 Flat Black.

IMG_3040 by Daniel Smith, on Flickr

Three good coat's on top and bottom, used up a full bottle of flat black.

IMG_3041 by Daniel Smith, on Flickr

Then I wented a wet sanded with 1000 grit sandpaper to polish the top of the paint, to remove the rough texture.  Then airbrushed on the last coat of Tamiya XF-1 Flat Black.

IMG_3046 by Daniel Smith, on Flickr

This morning a masked up for posting shading colors and exhuast.

IMG_3049 by Daniel Smith, on Flickr

I used Model Master Acryl Semi Gloss Black & Gloss Gull Gray.  I found a picture in a book that showed some gray color, but I think I'll go back over them with some flat black to tone them down.

IMG_3059 by Daniel Smith, on Flickr

The last coat of Flat Black went nice a smooth.

IMG_3061 by Daniel Smith, on Flickr

IMG_3062 by Daniel Smith, on Flickr

GreySnake: The only reason I can think those gaps and holes are there is because tamiya kits can be converted to rc.

Dan: I always thought f-117s looked like they had a hint of a grey tone. Your final coat looks great.

Finished getting the Abrams painted and the tracks built. Can't wait to start weathering.

That stealth fighter is looking great!

I can't wait to see the weathering on the Abrams too, Keyser!

Howdy all,

I'm back with a quick update.

Progress on my AH-1J continues. I've been able to get the fuselage together and some gray sprayed.

I started with a base coat of Light Ghost Gray.

Then I got the Dark Ghost Gray and Medium Gray sprayed to complete the camo. I couldn't find references or pictures that showed the camo pattern, so I used a little artistic license.

The stub wings, skids, and elevators are just dry-fitted for the sake of the photos. It's tough to see the difference between the LGG and the DGG, but I'm happy that's the way the two colors appear in my reference photos. The Medium Gray seems a bit blue when compared to my references though. I play on misting on some LGG to tie the three colors together. Maybe that will help tone down the Medium Gray.

Next will be prepping the airframe for decals and assembly of the fiddly bits.

Comments, questions, and criticisms welcome. Stay tuned for more!

-O

Hey Boris, no reason to be shy. I've always liked the looks of the Stuka. Your build looks great from here. Keep it up! I'm looking forward to seeing more.

I've managed to make a little progress on my AH-1J. I got the elevators and stub wings installed. Also, I've got the markings on it too and started a little weathering.

The airframe I'm working on didn't have a lot of stencils, at least not that I could see. The other airframes in the squadron wore minimal markings too. I didn't have decals to match the squadron code nor the modex, so I has to make stencils and paint them on.

From what I could see in my references, not all airframes in this squadron had their serial number painted on, and it looks like the airframe I'm modeling didn't either. Although they did have the MARINES stencilled on the tailboom and a stars-and-bars on the fuselage. Again, markings and styles varied from airframe to airframe, even within the same squadron, but it looks like this is how my subject was painted up. On my build, the MARINES and national insignia are decals from my pile.

This one's nearing the finish line. I hope to have it wrapped up over the weekend.

Thanks for looking. As usual, comments, questions and criticisms are welcome.

Cheers!

-O

Howdy O!

That snake is lookin' good! I just wish there was a little more contrast on the greys there - for now a lot of your great work with painting is partly invisible - a pity!

As for my build I started putting the Captain together - I joined the parts with milliput:

Thanks for lookin' and have a nice day

Paweł

Pawel, 

WOW! Your figure is looking great! I'm floored by your painting skills. Speaking of painting, thanks for the feedback on my Cobra. I agree with you that there is not much contrast between the grays on my snake. Truth be told, I think there's a bit too much contrast between my colors! I used the photos on the links below as reference. As you can see, there isn't much contrast on the real thing(s). I would even argue that there's less contrast on the real airframes than there is on my build. Using these photos as reference for the camo's color or pattern was very difficult (read: impossible) for me. So, I went with the ol', "Eh, it's close enough."

Reference 1: https://www.flickr.com/photos/133813370@N04/with/50596890681/

Reference 2: https://www.dstorm.eu/pages/en/usa/ah-1.html

Still, thanks for the feedback. I appreciate the input. 

-O

One of the benefits of working from home during this pandemic is the bench time. When I have a virtual meeting and listening to someone ramble, I can do some modeling while "listening." 

I'm working towards the finish line with my AH-1J. I'd say I'm in the last turn before the final straight. Now I'm at the point where I'm thinking the whole, "Oh, yeah, I still need to do that." before I get to the final assembly. While sitting at my table today, I tackled two of those "little things" that needed to get done.

The -1J had a shroud or shield (for lack of a better term) covering the canon's opening in the turret. The Fujimi kit does not have that covering.

Some -1Js during ODS did not carry them, but the airframe I'm modeling did. So, I scratched one from some stryrene.

It's not perfect, but I think it looks the part. 

Also, I realized that I lost the pitot for my kit. When I went to look at the one in AH-1G project to measure, I realized that one was missing too. So, I used the one on my USMC -1G for measurements and scratched one...er...two. 

Here's one. Again, not perfect, but I think it'll look fine under some paint.

I hope to have this kit wrapped up over the weekend. I just have a few odds-and-ends to wrap up before final assembly. Once it's done I'll be able to turn my attention to other projects.

Thanks for stopping by! 

Cheers,

-O