Moto GP group build '05

Yes I was :-)

I'm waiting and waiting for Renaissance to get on with their promised transkit for this bike. It had a release for last autumn at first but now I don't know what happened.

They are supposed to do the repsol, repsol test and repsol muguello bikes wich would be a nice set for the shelf.

Miami was good by the way but I didn't manage to find any nice model deals. I guess I'll stick to E-Bay. Nice and warm in Florida though.

best regards
joel

Do you guys have some tips regarding modeler saws or thin blade saws in general? I need to have some and don't know what to shop for.

Any tips would be much appreciated.
/Joel

Joel,

I don't know what the shipping costs would be to you from here in Texas, but Squadron Mail Order has a nice selection of tools and stuff.  Not always the cheapest, but you can find sales now and then.  Check them out:

http://www.squadron.com/SearchResults.asp?ScaleList=everything&TypeList=17&ManuList=everything&Key=&Submit=Go

 

Also, I got an email today with a shipping confirmation for my airbrush repair parts.  Hopefully we'll be back in business this weekend.

Hey welcome back Joel! Good to hear you've enjoyed it!

The Ducati is finished. I will take some pics and post shortly. Flat camera batteries (charging!), family birthday and a few other things kept me from it. Will hopefully get around to it shortly! Don't ecpext too much - the decals really looks bad after the semi-meltdown, and all that on top of that one screwy can of TS49 that did not help... But it was a very nice build, Tamiya cannot be faulted on this one!

OK, so I finally got my airbrush put back together and attempted to do a little painting of some exhaust pipes.  Problems soon ensued as I now have a surging problem with the paint being fed through the brush (I have a Badger Anthem 155 dual action internal mix) and the paint I'm using is apparently so old that what I had personally mixed to be a nice representation of titanium (Testors chrome silver, gold, and some copper) now looks PINK and grainy.  ARRGGHHH!  This is after I got the pipes for both my N. Hayden RC211V and Melandri M1 done of course, so I've got to start all over again. 

In other more pleasent news, I just won a Lion Roar PE set for the M1 off Ebay.  Anybody ever use one of these yet?  Also had a bid in for one for my not-to-be-built-for-months Williams FW24, but no luck there.  Oh well, pipe stripping awaits.

She's starting to look like a race bike!!!!!

Looks great, Wolfpac!  Quick question- I've read through our thread and I'm still a little confused, I've got Tamiya's Duc Desmo 14101, and I'm looking to get the Marlboro decals for it.  What year do I get?  Am I correct in assuming that the model is an '04?  I've already got the fork set, and that's about all the mods I plan on doing to this one meaning I don't want to do a bunch of chopping and pasting to make it an '05.  All I want is to make sure the markings are accurate. 

The Hayden RC's progressing just fine, pipes are painted and looking pretty good.  Might post pics later on. 

Yamafreak72 wrote:

Looks great, Wolfpac!  Quick question- I've read through our thread and I'm still a little confused, I've got Tamiya's Duc Desmo 14101, and I'm looking to get the Marlboro decals for it.  What year do I get?  Am I correct in assuming that the model is an '04?  I've already got the fork set, and that's about all the mods I plan on doing to this one meaning I don't want to do a bunch of chopping and pasting to make it an '05.  All I want is to make sure the markings are accurate.  The Hayden RC's progressing just fine, pipes are painted and looking pretty good.  Might post pics later on.

The Tabu Designs decals come with the option of the 04 and 05 set ups.  The nice thing about the Tabu decals is that they give you the option to paint the white potion of the side fairing by supplying extra decals for the black outline stripe and the solid black Marlboro decals.



Thank you BTW!  Here's a pic of the finished product


Here's the link to all the build pics
http://s63.photobucket.com/albums/h158/wolfpac52/

Erik

Nice one. I like the blueing on the exhaust especially.  So am I to assume that the only difference between the '04 and '05 Desmo is in the markings? 

Yamafreak72 wrote:

Nice one. I like the blueing on the exhaust especially.  So am I to assume that the only difference between the '04 and '05 Desmo is in the markings?

Thank you.

I do not believe that there were any bodywork modifications done between 04-05.  None that I could point out from a picture anyway.

 This hobby is becoming more and more expensive.  Now I have to find a way to fit this one in

http://www.renaissance-models.com/wip_proto_nsr_2001.htm

The decals seem highly complex.  I'm not sure if I have enough skill and Micro Sol to be able to build it

Hi Wolfpac, 

                    nothing like a challenge I say. I am getting some in a few weeks so will do a reveiw of the t/kit. Going by Renaissance standards they will be very good and I use the same printer so they are amongst the bestus.

Cheers  Rod.

 

               

I'd say it's not possible to build the ´05 Marlboro Desmosedici on the ´04 Tamiya kit. They'll be out with a ´05 Roberto Rolfo scheme soon wich uses the ´04 set up but I'd say the ´05 has a different look. I'll get back on in what way they differ.

Joel

Hi fellas,

I sort of forgot about modelling for a few months, but I'm back into now. Still got my M1 under way. Don't know when I'll get around to finishing it, but I'll let you all know when it's done. There's some great looking progress been happening while I was away. Good work everyone.

Whoo-hoo! He's back! Was wondering what happened to you, mate!

Welcome back and enjoy the "fresh start"... a break never did anyone harm.

Good to have you back, Ping. 

So I go to start decaling my Hayden RC with the Museum Collection decals I spent $15.69+ shipping from HLJ and I have one thing to say about them...GARBAGE! I mean, CRAP! I've never experienced such bad fitting, unable to handle Micro-sol, inaccurate decals in all my years of modeling.  I swear they must be for a 2002 RC, even though they're marked for '03 and have Nicky's numbers and such.  The red and white stripe for the side fairings isn't even CLOSE to the right shape, and forget about trying to get them to go around the complex curves of the radiator outlets, flakes of color coming off...etc.  So now I've got a half-built RC that's gone pretty OK up until now- even the paint wasn't a bad experience- and no decals for it.  I think I'll continue my rant over at HLJ's website, and see if I can't get the Repsol decals that came with the '03 Rossi RC211V.  They've been pretty good before- I got them to send me the late '03 open exhausts for the bike I'm doing now.  It cost a few bucks, but cheaper than bashing a whole kit.  Sorry for the rant, I will now cease venting.  Hope you all are having better luck.

Sean

Hi Yamafreak72 sorry to hear about your bad luck with the Museum Collection decals.   I have a couple of sets which I have not used yet (put off by all the bad reports) and I do not buy them any longer.

 

Progress so far is:

Telefonica Suzuki RGV 2000

Model is all painted and decaled just needs assembly.

Hayden Repsol Honda RC211V 2003

Building the version with low exhausts but still older cowlings i.e. the sort of in between version pre Valencia. Painting completed allowing the paint to cure for about a month before decaling

Ducati GP4 Pramac

Assembled all body parts and sprayed the primer coats, just waiting for some warmer weather to spray the final gloss coats

 

Andrew

So, can anyone determine if the open exhausts first showed up in the Valencia race?  My Hayden bike also has the shorter fairings and open pipes.  I e-mailed HLJ and hopefully soon will get the decals from the Tamiya kit.  I just don't want to go through all this and build an inaccurate bike.  Oh well, I'm reasonably sure Big T will release a newer version of Hayden's RC, so EVENTUALLY I'll have an accurate bike.  For now, on to the Desmo!

Hi Yamfreak72

 

Pictures that I downloaded from the Official GP web site show the low exhausts with the old style fairings as early as the Chec GP and certainly before Valencia where the bike had lower exhausts and the more enveloping cowlings (Like those presented in the Tamiya Valencia kit).

 

Pit Walk Collection Vol 2 MotoGP 2003 shows lovely views of Hayden’s bike with low exhausts and sill the early 03 cowlings. Similarly the Camel and Movistar Hondas were also running low exhausts before the end of the 2003 season but with what appears to be the older 2003 cowls. There is also a Movistar version that ran a single “low exhaust different to all the other bikes. I can e-mail you the Repsol pictures if you provide me your address. A copy of the abovementioned book will be a great help. I have bought them all as they are so useful for reference

 

I am modeling Hayden’s 2003 bike based on the pictures in the 2003 Pit Walk book as it covers all the views and also matches the decals provided in the 2003 Repsol Honda (kit 14096) i.e. the decals will fit on the old style cowls but I used the low exhausts and the one side cowl from the Valencia kit (bought just the sprue with the required parts from HLJ) Hope this helps, it is very confusing without references and even then you could get it wrong, they seem to do modifications at almost every race.

 

Andrew

So, did the decals from the Tamiya kit (14096) fit the Valencia fairings?  I'm confused.  I think since I already have the early cowl painted, I'm just going to stick with it.  I'm getting pretty frustrated with this build, and am shelving it until my decals show up from HLJ, hopefully soon.  Thanks Andrew for the explanation and reference to the books, I'll be checking ebay for them.  Speaking of changing exhausts every race, remember the twin undertail exhausts they ran a couple times in 04, I think it was?  Kinda neat, haven't seen a conversion kit though.  But after six of them, I think I'm going to take a break from RC211Vs for a while.  Off I go to the Duc!

Hi Yamafreak72

The decals with the kit will fit the revised 2003 early low exaust version because the cowlings are still the same except for the lower belly cowl which has the cutaways for the exhausts, so the sponsor decals while still the same need to move, but this is simple enough to do. If you do the later cowlings like the Valaenci bike then the decals are too small. I have painted all the cowlings but not appled the decals yet, but I do not forsee any problems

Good luck futher. I am also busy with the Ducati doing the Pramac version

Andrew

Hi Yamafreak72

Here is some more info that might help. Shown below in picture 1 from the 2003 Official MotoGP website showing Rossi at the Chec Grand Prix. The picture 1 below (in typical Rossi style) clearly shows the use of low exhausts and the oldish style cowlings. Pit walk 2003 shows from what I can tell the low exhausts being used about from Round 11. Later in the season for example at the Portuguese Round Rossi was running the low exhausts and the revised cowlings that are more enveloping (see picture 2 below), this would then be like Tamiya's Valencia Kit 14097.

The version I am modelling is the Repsol 2003 with the low exhaust but still the old style cowlings like the version shown in picture 1 below, since I can still use the decals from the Tamiya Repsol 2003 (kit 14096) as they will fit the cowlings since they are the same, and have used the low exhausts, heat guard and lower RHS belly cowling from the Tamiya Valencia Kit 14097. This in effect produces a more or less accurate version of the 2003 Repsol Honda shown in picture 1

Picture 1: Reposl Honda low exhaust and still old style cowlings as at Chec Round

Picture 2: 2003 Reposl Honda low exhaust and new cowlings as at Portuguese Round

Hope this helps!

Andrew

Hi Yamafreak72

Have gone back to MotoGP website and traced the exhaust cowl situation as follows:

 

Early Cowl means (like the cowls provided by Repsol kit 14096)

Late Cowl means the more enveloping cowl (like the cowls provided by Valencia kit 14097)

 

From what I can trace the exhausts and cowls developed as follows:

 

Round 8 British          Rossi ran high exhaust early cowl Repsol kit 14096

Round 9 GER             Rossi ran low exhaust early cowl

Round 10 CZE            Rossi ran low exhaust early cowl

Round 11 POR           Rossi ran low exhaust late cowl same as setup in Valencia kit 14097

Round 12 Brazil         Rossi ran low exhaust late cowl

Round 13 MAL          Movistar ran low exhaust early cowl and Camel sill on high exhaust early cowl

Round 14 AUS           Camel sill on high exhaust early cowl

Round 15 VAL           Movistar ran low exhaust early cowl

 

So from a modeling perspective you could use the Repsol kit 14096 with the low exhaust and early cowls for rounds 9 and 10 after that it would be the low exhaust and late cowls as per the Valencia kit 14097 but some mods to the decals would be necessary as the cowls are more enveloping

 

You could model the Movistar with low exhaust and early cowls as of round 13

The Camel from what I can tell ran the high exhaust early cowls throughout the season but this could still be incorrect as Pit Walk shows pictures of a Camel with low exhaust and late cowls

 

Picture 1: Rossi in Germany running low exhaust and early cowls

 

 

Picture 2: Rossi in Portugal running low exhaust and late cowl

 

 

Picture 3: Movistar in Mal running low exhaust and early cowls

 

Hope this has helped clarify what to model; it is none the less interesting to say the least!

 

Andrew

Interesting discussion, this sort of stuff has become really confusing over the last few years. In my opinion it started when the rcv:s entered the arena, a lot of teams and a lot of in-between races changes to the cowlings. Makes it harder for us rivet counters but if you get your references straight you can easily make a more personalized build.

Talking about the two pipe under seat exhausts of the 04 repsol machine there is a japaneese transkit that is shown on Max Motomodelling. Looks really good to me. Hope to get my hands on one.

best regards
Joel

Thanks Andrew for the pics and references.  I probably will stick with the early cowl and low exhaust to avoid what I'm sure will be a painful and frustrating modification to the Tamiya decals.  Sorry to sound discouraged, but this kit has been a bad luck charm from the first cut of part from sprue.  I'm more than ready to get knee-deep in the Ducati, which so far is an outstanding kit.  Prepped and painted the insides of the cowlings black last night, and will probably airbrush on some Testors Guards Red tonight.  Looks to be pretty close to Ducati red, really bright.  If things go well, I'll try and post pics, even though it seems like there's quite a few Desmo's under construction already. in the meanwhile, anyone heard news as to what's next MotoGp-wise from Tamiya?

well guys have got a bit done ,have got final coat of paint on kawa kr500 only have to decal now so post some pic's soon.
In mean time have finished a 1/9 duke gp
decals to go on 1/12 Tamyia duke.

Next projects inline
spiderman M1-superdetail job (well to my limits it will be .
2005 Movistar RCV
2006 ducati?
+ 2-3 older gp bike's, the way be going with the kr500 all of these will keep me busy for years and years

Shayne
forgot have also started a 1/6 cbr750 racer

Here's some pics of a project I've been working on.  CF decals can be your best freind or your worst nightmare.  I still have a lot of detailing to do (clip ons, bolts, etc), but I figured I would share some progress pics.  I did my best with scratch building the data collection unit in front of the speedo.  Not a perfect match but I think it looks better than nothing.  The CF raidiator covers were a pain in the butt, and I think I may have some fitting problems with applying the upper.  The CF of the rear cowel and fuel tank was not as painful as I expected.  The nice thing about the decals was being able to cut a scrap peice and match it up, micro sol does a fine job of making the seam line disappear. I've done so many little things outside of the text build I cannot remember them all.  I still need more practice, I do not feel my builds are coming out as clean as everyone elses, but that's the fun part about this........practice













All comments welcome, good and bad.  Somehow the CF decal for the silencer shifted while Sol was applied.  Any tips on getting it moved back without screwing up the decal?

Thank you,
Erik




*edit*  I just realized I forgot to paint the raidiator cap

Erik: This is really great! You've done so much progress in your building skills. This is one terrific M1.

my best regards

Joel

Great build, Erik!  I really like how you did the weld seams on the exhaust pipes.  I'll have to incorporate some of what I've seen on yours into my next M1.  What brand of C/F decals did you use?  I'm considering mixing scales/brands in the future to make things more interesting visually.  No building for me this week, I'm in lovely Philadelphia for business, but I did put the first coat of Guards Red on my Duc before I took off.  Gotta post pics when I get back. 

 

S/F

Yamafreak72 wrote:

Great build, Erik!  I really like how you did the weld seams on the exhaust pipes.  I'll have to incorporate some of what I've seen on yours into my next M1.  What brand of C/F decals did you use?  I'm considering mixing scales/brands in the future to make things more interesting visually.  No building for me this week, I'm in lovely Philadelphia for business, but I did put the first coat of Guards Red on my Duc before I took off.  Gotta post pics when I get back. S/F

Thank you!

The CF is from scale motorsports.  I purchased the template to do the exhaust cover, heal garuds, fork covers and ram intake (the kit is in 1:20 scale).  The kit also includes the rear fender however, I used the 1:12 scale pattern to break it up.  I also used the 1:12 for all of the fairings.  The Data boxes in the rear cowel are from spare parts of a NSR 500.  The speedo data box are peices cut from a YSR 500.  The steering damper is also from a YSR 500.  I was originaly going to tape off and air brush the weld marks in the pipe however, I assembled the pipe and realized that I was not going to be able to get the tape tucked into certain areas.  I have the PE exhaust springs and rotors, I just cannot figure the stuff out.  I really need to find a group who builds autos and bikes and have someone show me how to do it.  I've wasted too much money trying to get it right.

Thank you again!
Erik