SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

IT'S BACK! Secret Santa 2: Rudolph Strikes Back

67701 views
1230 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Sunday, January 11, 2009 11:12 AM

Thanks Chris!

Started painting it yesterday, and pics will come soon!

Cheers,

Azgaron

 

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Sunday, January 11, 2009 5:06 PM

Small update! Laid some white on the underside!

Next, I'll paint the dark blue on the underside, before I start masking for the blue-grey.

Cheers,

Azgaron

 

  • Member since
    October 2006
  • From: Iowa
Posted by Mist086 on Sunday, January 11, 2009 6:07 PM
Lookin Sharp man!!  Really nice
  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Monday, January 12, 2009 11:06 AM

Thanks Mist! Smile [:)]

Cheers,

Azgaron

 

  • Member since
    July 2003
  • From: waynesboro va, via Ireland
Posted by sidure on Monday, January 12, 2009 2:49 PM

Good to see some paint on the Corsair Azgaron. I like those schemes and cant wait to see this with more paint on it, looking good

Steve

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Thursday, January 15, 2009 12:18 PM

Thanks Steve!

I did some painting yesterday!

Perhaps a tad bit too dark!

Cheers,

Azgaron

 

  • Member since
    September 2004
  • From: Vernon, BC, Canada
Posted by razordws on Thursday, January 15, 2009 3:14 PM
Looking good Azgaron.  The preshade on the white wings looks great! Thumbs Up [tup]  I'm no expert by any means, but didn't the tri-colour scheme have the mid-blue on the undersides of the folding wings? 

Dave

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Thursday, January 15, 2009 3:55 PM

Thanks Dave!

I'm not sure, I'm only following the instructions! Smile [:)] I think I've read somewhere that they should be Navy blue, but as I said, I'm not sure!

Cheers,

Azgaron

 

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Wednesday, January 21, 2009 10:00 AM

Dave, I heard that the wings where painted blue so they shouldn't show as much when folded!

Here's the latest progress!

Cheers,

Azgaron

 

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Wednesday, January 21, 2009 3:30 PM

I did a repaint on the underside of the wings! It didn't turn out the way I had in mind, and I forgot to take notes of the mix!

I this Ok?

Cheers,

Azgaron

 

 

  • Member since
    December 2002
Posted by Bossman on Wednesday, January 21, 2009 7:28 PM
Looks good to me.  The medium blue is what I've always seen on the underside, outer panels of a Corsair in a tri-color scheme.  She's coming along nicely
  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Thursday, January 22, 2009 4:31 AM

Thanks Bossman!

Cheers,

Azgaron

 

  • Member since
    July 2003
  • From: waynesboro va, via Ireland
Posted by sidure on Thursday, January 22, 2009 9:34 PM

Looks very nice from here Azgaron. I cant remember which colour it should be but the intermediate blue sure looks purdy.

Steve

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Friday, January 23, 2009 6:07 PM

Thanks Steve!

Cheers, 

Azgaron

 

  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Thursday, January 29, 2009 10:07 AM
Looking good Azgaron!  Smile [:)]

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Thursday, January 29, 2009 1:19 PM

Thanks Scott!

Cheers,

Azgaron

 

  • Member since
    June 2003
  • From: Caput Mundi
Posted by Avus on Monday, February 2, 2009 1:31 AM
Great work, Azgaron!
Sorry to hear about the color-mishap, but the second version looks way better!

Klaus

Thanks to ImageShack for Free Image Hosting

  • Member since
    July 2007
  • From: Sweden
Posted by Azgaron on Sunday, February 8, 2009 7:50 AM

Thanks Klaus!

I think I'll stick with the second version! Let's hope that I can manage to mix a match for the color I used, since I forgot to take notes!

Cheers,

Azgaron 

 

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Monday, March 30, 2009 9:04 PM

So it's slow going here... but I'll get it done one of these days! Here's my F-4U 1D backdated to a 1A. Paint is on! Paint fading is still in the works...

Questions and comments welcome!

  • Member since
    July 2003
  • From: waynesboro va, via Ireland
Posted by sidure on Tuesday, March 31, 2009 12:11 AM
RadMax, very well done and I like seeing models at this stage of construction, which way to go from here?. Light or heavy weathering. Loking forward to seeing the final outcome
Steve
  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Tuesday, March 31, 2009 8:35 AM
I'm looking to make this one look well used... I made the cockpit pretty weathered, so I figured I should match the exterior to that. This was a land-based bird, so it's going to have some ground grime on it. Now I just gotta figure out a good way to weather it... I'm thinking spray Tamiya Smoke along the panel lines of the white...
  • Member since
    December 2002
Posted by Bossman on Thursday, April 2, 2009 11:14 AM

Great work so far man.  Looks like we've got two tri color Corsairs that may be landing at the same time !

Chris

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Sunday, May 3, 2009 5:48 PM

Ok guys, finally got some good work done on the Corsair. They say a picture is worth a thousand words, so here it goes!

A question for all the critics out there: Is the white wash on the dark blue too much? Sometimes I think it looks ok, others not so much. Thanks for looking!

  • Member since
    June 2003
  • From: Caput Mundi
Posted by Avus on Tuesday, May 5, 2009 1:15 AM

Great work RadMax! I love the light color you used for panelling the aircraft.

I think it looks more than just ok!

Klaus

Thanks to ImageShack for Free Image Hosting

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Tuesday, June 16, 2009 2:54 PM

Here's another update from my workshop!

Almost done, hopefully she'll be complete by this weekend!

  • Member since
    June 2003
  • From: Caput Mundi
Posted by Avus on Wednesday, June 17, 2009 7:22 AM
Veeery nice!
Looking forward to see it done.

Klaus

Thanks to ImageShack for Free Image Hosting

  • Member since
    December 2002
Posted by Bossman on Wednesday, June 17, 2009 11:31 AM

Max,

Very nice weathering job and overall build.  Pretty !

Chris

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Saturday, August 8, 2009 11:58 PM

Alright I finally finished this bad boy off! I think it's one of my best so far! Special thanks to Leadas for the kit! I added some extras to my Corsair: Scratch built nav lights, True Details cockpit (not worth it!), ignition wires, built the flaps in the UP position, removed the tail hook, changed the direction of the tail wheel, made Tamiya's bomb rack more realistic, and used Eagle Strike decals, for Lt. Jg. Merl W. Davenport. His plane was stationed at Bougainville in 1944. Hope you guys like it!

  • Member since
    July 2003
  • From: waynesboro va, via Ireland
Posted by sidure on Sunday, August 9, 2009 12:23 AM

RadMax, absolutely great build and well wort the wait to see it finished. I thin you nailed the well used and abused look to it. How did you do the light panells, I must have missed how you achieved that effect, very nice.

Steve

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Sunday, August 9, 2009 10:02 AM

Steve, thanks! I'm glad you like it. In retrospect, I should have gone lighter on the paint chipping and heavier on the paint fading. But hey, I like the Corsair and this is a beautiful kit. Plus I've got decals for three other planes!

I'm not sure if you're asking about the panel wash or faded panels, so I'll explain both. The light panel wash is put out by Promodeler, and it's really great stuff. I used the dark wash on the bottom surfaces. To make the lighter panels, I cranked my airbrush down to about 3 psi and thinned the paint down a lot. I lightened the base color with white and buffand then filled the panels in. Hope this helps!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.