SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Bf-109: Reich Defender GB The End

186019 views
1406 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2005
Posted by Thunderbolt379 on Tuesday, November 25, 2008 11:37 PM

Hi Phoenix --

So, there was minimal addition? She looks the part, she really does! Actually, I feel up to taking a crack at the gear indicators and brake lines, I'm pretty sure I have the right materials in hand, so I'll do a spot of research and see what I can come up with.

Three-second question, is Tamiya XF-22 an equivalent to RLM 66??? Anybody have a clue?

Cheers,

Mike/TB379

http://worldinminiature.blogspot.com/

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Tuesday, November 25, 2008 11:42 PM
Mike- Tamiya XF-22 is a good match for RLM 02.  Not exactly sure on a good match for RLM 66.  Tamiya XF-63 is a pretty close match.  I usually undercoat with XF-69 NATO Black and then mist on the XF-63.  HTH!

Frank 

 

  • Member since
    April 2005
Posted by Thunderbolt379 on Tuesday, November 25, 2008 11:53 PM

Hi Frank,

Are you positive? I was just looking at a color chart and it looked like XF-24 was the 02 match, XF-22 was given as a very dark gray. It was an old chart, though, and may have been mislabled! Hmmm, the rated Humbrol equivalents are Iron Grey and Tarmac, respectively... I'm looking for an acrylic to save lugging the gear outside to spray enamels. I'll have a chance to look into the LHS on Friday, I can make a comparison on the shelf.

Cheers,

Mike

http://worldinminiature.blogspot.com/

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Wednesday, November 26, 2008 4:23 AM

 phoenix7187 wrote:
Wing nut I have the 1/32 revell  lone eagles 109G kit this also has white 1 decals in it. So I have 2 sets in 1/32 but nothing in 1/48.  

 

Thnaks for looking Stan.  The Yellow 1 you mentioned, That's the one on the smae sheet just above isn't it?   Do you have more than 1 set, that was actually my 2nd choice. A bunch to offer in tradeSmile [:)]

Marc  

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Wednesday, November 26, 2008 7:10 AM

Mike,

Pretty sure.  Here's a link to the color charts I use most often from IPMS Stockholm:

Urban's Color Reference Part 1

Urban's Color Reference Part 2

HTH!

Frank 

 

  • Member since
    April 2005
Posted by Thunderbolt379 on Wednesday, November 26, 2008 7:18 AM

Hi Frank --

Many thanks, I'll check 'em out!

I wish I could HTH right now, but I'm using a graphics program to make custom instrument panel decals for the cockpit I've about half-done. If I can get the fuselage closed up the rest of the model will flow along easily, but I've only got a fortnight to go and there's patterning and casting to be done, as well as finishing another major conversion in the same timeframe. Late nights will probably be the rule for the next few weeks...

Cheers,

Mike

http://worldinminiature.blogspot.com/

  • Member since
    May 2004
  • From: Dallas
Posted by KINGTHAD on Wednesday, November 26, 2008 8:26 AM

marc, let me check the stash. Is that on of the defending the Reich sets.

Thad

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Wednesday, November 26, 2008 9:02 AM
Thanks Thad. It's from "The Blonde Knight-Erich Hartman's G-6's"  I was thinking of either of those since my kits only comes with the galland canopy.  At this point any G-6 with that canopy will work.

Marc  

  • Member since
    May 2004
  • From: Dallas
Posted by KINGTHAD on Wednesday, November 26, 2008 10:17 AM

Im at work today (someone has to look keep a eye on things) but I will look over the long weekend.

Thad

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Wednesday, November 26, 2008 2:43 PM

Hey everyone, it's the 27th in parts of the world so feel free to start your builds!  If anyone cares to share any previous builds of late model 109s, feel free to share them here for inspiration!  I would love to see them. Tongue [:P]

Here's my 1/48 G-10 from earlier this year:

Anyone else?

Frank 

 

  • Member since
    October 2004
  • From: League City, Texas
Posted by sfcmac on Wednesday, November 26, 2008 3:02 PM
My goodness!!!!! Shock [:O] Time to start already?!?!?!?
  • Member since
    March 2007
  • From: NJ
Posted by JMart on Wednesday, November 26, 2008 4:29 PM
Thats a gorgeous build Frank... definitively an inspiration, hope my G10 ends up 1/20th as good as yours

 

 

  • Member since
    February 2007
  • From: Bournemouth UK
Posted by Luftwoller on Wednesday, November 26, 2008 4:33 PM

Time to start already?.....Im done, wheres me badge. God you guys take your sweet time.

Arf arf arf, heres my G10 i did a while ago. I havent even bought the K-4 kit yet and i still need to finish my Sparaverio. Oh and Aarons roped me into another GB. Damn you Big Smile [:D]

...Guy

..'Your an embarrassment to the human genus, makes me ashamed to call myself Homo'.
  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Wednesday, November 26, 2008 4:51 PM

Here is my Fujimi G-10 I did last year.  Did this for only one reason the bright friggin' green.

 

Other then a little silvering of the decals it came out OK

 

  • Member since
    October 2004
  • From: League City, Texas
Posted by sfcmac on Wednesday, November 26, 2008 5:05 PM

Laugh [(-D]Guy ! Your slowing down! Must have a cold or something...Whistling [:-^] Hmmmm now ok I am the odd man out here? Am I the only one who has no late model 109? WHats going on here?! Tongue [:P]

This kinda looks like a 109? Dunce [D)]

Maybe from a different angle...... Dead [xx(]

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Wednesday, November 26, 2008 5:24 PM

Lets rock! Who is going to be the first to post some progress pics! I know I'm starting on mine tonight. Stuck waiting for decals for my Me 109D so no better time than ever!

                                                                                    Soulcrusher

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Wednesday, November 26, 2008 6:21 PM

Thanks James, I appreciate that. Approve [^]

Guy, John- Way to go fellas!  Thanks for those pics, I am really pumped now to get to work on mine!

Mike- Youdaman!  I'll be expecting pics from you by the time I get home tonight Mister. Big Smile [:D]

Frank 

 

  • Member since
    June 2004
  • From: Akron ohio
Posted by phoenix7187 on Wednesday, November 26, 2008 7:49 PM

Wing nut if you not set on building a late G-6 you could also build a G-14.

the top "white 5"  and the very bottom one "yellow 18" are open If you like either one of these. Note that yellow 18 is a late G-14 and has the longer tail wheel and tall wooden tail. Don't know what you kit has with it?  

The 1/48 hartmann decals I have would be for the very top option on the eagle sheet. I have a spare standered framed canopy for a hasegawa G if you want to build this. very top.

I also have this. the top 109 is actually flown by a not so well know experten gunther Josten who ended the war with 178 victories. If you like yellow this 109's for you.

The only one not available onthis sheet is "red 13" I did that alreadyBig Smile [:D] 

Stan
  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Wednesday, November 26, 2008 8:37 PM

Well I just could not disappoint you Frank so here is some WIP! its not much but its a start! I painted and installed the wing radiators then closed up the wings. Painted the cockpit peices and also removed the resin wheels from the casting and cleaned them up. so it has begun!

                                                                                       Soulcrusher

 

  • Member since
    December 2003
  • From: Indiana
Posted by hkshooter on Wednesday, November 26, 2008 8:41 PM

I'm chompin at the bit to get this build started. This Saturday I'm going to drive the two hours to Hobby Town USA to get a kit. I certainly hope they have one in stock!

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Wednesday, November 26, 2008 8:54 PM
 soulcrusher wrote:

Well I just could not disappoint you Frank so here is some WIP! its not much but its a start! I painted and installed the wing radiators then closed up the wings. Painted the cockpit peices and also removed the resin wheels from the casting and cleaned them up. so it has begun!

                                                                                       Soulcrusher

Crusher you're killing me.  Nice work so far.

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Wednesday, November 26, 2008 9:28 PM

Just could not let Frank down!  Now lets see how much I can get done tomorrow in between stuffing myself with turkey pie and cookies! Yes it will be in that exact order too!

                                                                              Soulcrusher

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Wednesday, November 26, 2008 11:05 PM
 wing_nut wrote:

Does anyone have these decals in 1/48 that they don't have plans to use?  I would buy the sheet but for 1 set of markings... I have so many 109 sheets but not that one.  It Eagle Cal #36.  I have dozen to offer in trade. E's, F's G's, K's... Europe, desert, Battle of Britain etc.

 

Marc, I have those on an Aeromaster sheet dedicated to Hartmann (I'll be using the ones for his G-14 in the winter camo). The markings for "white 1" are yours if you still need 'em. Thumbs Up [tup]

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    February 2007
  • From: Bournemouth UK
Posted by Luftwoller on Thursday, November 27, 2008 4:02 AM

Nice start, Crusher. You win the 1st to the gun award.

Shooter, if its a 2 hour trip to your LHS, id use that wonderful device called a telephone and check your not on a wasted trip Big Smile [:D]

Aaron, thats the oddest looking 109 ive EVER seen. Swet looking build though, chum.

...Guy

..'Your an embarrassment to the human genus, makes me ashamed to call myself Homo'.
  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Thursday, November 27, 2008 5:55 AM
 sfcmac wrote:

Laugh [(-D]Guy ! Your slowing down! Must have a cold or something...Whistling [:-^] Hmmmm now ok I am the odd man out here? Am I the only one who has no late model 109? WHats going on here?! Tongue [:P]

This kinda looks like a 109? Dunce [D)]

Maybe from a different angle...... Dead [xx(]

THAT'S BLASPHEMY.  NO WONDER YOUR COMPUTER BLEW UP.Evil [}:)]

 

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Thursday, November 27, 2008 7:28 AM

Stan, Thad... I really appreciate the effort you made to help me out.Smile [:)]  Mike has the ones I am looking for.

 

Mike PM inbound.

Marc  

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Thursday, November 27, 2008 7:40 AM
 tempestjohnny wrote:
 sfcmac wrote:

Laugh [(-D]Guy ! Your slowing down! Must have a cold or something...Whistling [:-^] Hmmmm now ok I am the odd man out here? Am I the only one who has no late model 109? WHats going on here?! Tongue [:P]

This kinda looks like a 109? Dunce [D)]

Maybe from a different angle...... Dead [xx(]

THAT'S BLASPHEMY.  NO WONDER YOUR COMPUTER BLEW UP.Evil [}:)]

Laugh [(-D]

SC- That's some damn fine work!  Glad to see you're setting the pace for all of us. Approve [^]

I did a little to mine last night, cleaning up a few parts and going to work on some of them with my motor tool.  Hollowed out the exhausts, thinned the openings in the spinner, and opened up the openings in the gear bays and rudder pedals.

On the spinner, you can see the thinned opening on the right and and un-thinned one on the left.

 

Frank 

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Thursday, November 27, 2008 9:45 AM

Marc, got it and replied! Thumbs Up [tup]

Geez Louise! You guys don't believe in letting the grass grow under your feet, do ya! Shock [:O]

Great starts, guys! I'll be joining in shortly. Wink [;)]

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Thursday, November 27, 2008 10:59 AM
Frank that's some great work there.  Nice work onthe exhausts.  Thinning the spinner like that is something that never occured to me.  Nice.

Marc  

  • Member since
    February 2007
  • From: Bournemouth UK
Posted by Luftwoller on Thursday, November 27, 2008 5:02 PM

Very nice work Frank. The exhausts look brilliant my friend, and the spinner is something im definately going to...err..borrow.

...Guy

..'Your an embarrassment to the human genus, makes me ashamed to call myself Homo'.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.