Messerschmitt BF109 GB 2012

Squadron Signal BF-109E walkaround has very detailed photos including the wheel wells

    Going to start weathering the cockpit after adding the upper mg's and scratch more detail around the engine,,,, then onto the problematic fuselage,,, Herman and I thank you for looking,,,,

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

Looking good handi .  Just curious, is this going into the GB section?

Reasoned

Looking good handi .  Just curious, is this going into the GB section?

Thanks Reasoned!!   To be honest I never even thought about the GB section,,, mabye that should be changed,,,,,, heres the weathering done so far,,,,,what do you think?   I suck at judging whats too much or not enough,,,,hope to see your build soon!

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

Looks good. Were you aware that on the inlet side of the engine block there was a white serial #? Easy to do with dry transfers or a stead hand and fine tipped brush. John

I think its looking good! Tell Herman no laying down on the job or high command will send him to the Russian front.

                  Thanks guys and for the heads up John!  Started detailing the engine and compartment,,,,,,,,,

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

Wow, I am loving the detail of the engine of this kit!!! I will need to get this kit you have after I finish my first 109. 

pzl66

Wow, I am loving the detail of the engine of this kit!!! I will need to get this kit you have after I finish my first 109. 

 The add ons you see in the last two shots are all scratched from styrene, solder and wire insulation,,,,,,,,just trying to fill the engine compartment a bit more and give it a more realistic feel,,,,without loosing my mind    

       Here's a few more wip pics,,,,, Herman and I are feeling like we're hogging this GB,,, sorry dudes,,,,,thanks for looking,,,,,,,,,,,

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

Handiabled - no worries about "hogging the thread", you've just gotten off to a better start than the rest of us! (I will probably be lurking for the most part until the summer judging from the other builds I need to finish off first )

Nice work on the plumbing on that engine!

VanceCrozier

Handiabled - no worries about "hogging the thread", you've just gotten off to a better start than the rest of us! (I will probably be lurking for the most part until the summer judging from the other builds I need to finish off first )

Nice work on the plumbing on that engine!

                  Thanks !!!  Look forward to seeing your 109 !! 

No worries handi Im enjoying your build so far so keep the pics coming! Seems like Herman is being a little commanding lately. Telling you to put parts here and there, has Herman done his fair share of work?? 

pzl66

No worries handi Im enjoying your build so far so keep the pics coming! Seems like Herman is being a little commanding lately. Telling you to put parts here and there, has Herman done his fair share of work?? 

Thanks!! I will,,, no problem there,,, all Herman does is crank Do Hast on the boom box and watch me sweat (typical Illinois Nazi     )

Here - just so handiabled doesn't feel alone.   This -109G-10 was finished up in the fall. 1/48 Revell kit:

VanceCrozier

Here - just so handiabled doesn't feel alone.   This -109G-10 was finished up in the fall. 1/48 Revell kit:

 

 

 

 

      Thats a beauti Vance!!    Thanks!!    Hope mine turns out as good !   

From what I've seen of your engine work, you won't have any problems! How do you like the Trumpeter kit? (I know, you've just started it!) I haven't picked up one of their kits yet.

VanceCrozier

From what I've seen of your engine work, you won't have any problems! How do you like the Trumpeter kit? (I know, you've just started it!) I haven't picked up one of their kits yet.

Thanks again Vance for the kind words,,, so far I'm impressed with the kit,,oob it comes with some pe and vinyl tires,, other than the squared wheel bays and some changes that need to be made to the rudder and control surfaces it's a nicely detailed kit with crisp lines and pretty minimal clean up off of the sprue,,,,first Trump kit I've built also,,,,thought I'd give it a shot,,,,so far so good 

VanceCrozier

Here - just so handiabled doesn't feel alone.   This -109G-10 was finished up in the fall. 1/48 Revell kit:

She's a beaut, Vance! 

Since we're sharing, here's my Eduard 1/32 E-7 Trop from this time last year:

And Vance's favorite epic RATO pods...

Great job Doogs I've always wanted to try the desert/olive green schemes...Some more inspiration-

                                     Hey guys,,,,,,after seeing these builds I think you've raised the bar a bit,,,they look great!! 

Ok quick question, Im looking for an "E" version 109 model that 1/48 scale and that is well made with a nice amount of detail. Any suggestions? The G version is nice and all but the E model is my favorite. 

[quote user="pzl66"]

Ok quick question, Im looking for an "E" version 109 model that 1/48 scale and that is well made with a nice amount of detail. Any suggestions? The G version is nice and all but the E model is my favorite. 

I think the Tamiya one is actually a little superior to hasegawa's Emil, and IMO it beats the Airfix too, but out of these 3 hasegawas decals are the best and that doesn't say much...

[quote user="Nathan T"]

pzl66

Ok quick question, Im looking for an "E" version 109 model that 1/48 scale and that is well made with a nice amount of detail. Any suggestions? The G version is nice and all but the E model is my favorite. 

I think the Tamiya one is actually a little superior to hasegawa's Emil, and IMO it beats the Airfix too, but out of these 3 hasegawas decals are the best and that doesn't say much...

Thanks for the heads up, decals are the least of my issues with kits. 

I wouldn't be so quick to discount Airfix's new tooling of the 109e that can built in one of three versions.  I've only come across box reviews of the kit, but many have concluded that although the new molds are not ground breaking, they do bring it on par with Tamiay and Hasegawa.  I've an open box in front of me now and comparing to a built Tamiya E-4, my only concern is the somewhat heavey panel lines - whether this will appear less after a few layers of paint and clear cotes remains to be seen (will only know after I build it later for this GB).

If you plan to build the 109 with lowered/raised control surfaces might want to consider Airfix as they are all molded separately.  I've read the Tamyia E-3 version had issues with cowl shape.  On the E-4 it was corrected but unaware if subsequent boxings of the E-3 followed suit.  I've only the Hasegawa E-1 and is somewhat sparse on wing surface detail compared to the other two.  It also has the  exhaust molded as part of the fuselage.

regards,

Jack

Good observations Jack, Yes the hasegawa has some low points like the exhaust you mentioned and both tamiya and hasegawa's earliest boxings had incorrect noses, however this was fixed right away, all the "JT" series hasegawa boxes are correct. Both Hase and Tamiya have better surface detail than the Airfix, but the hasegawa Emil molds are getting a little old as the panel lines in places are shallow and barely visible, but maybe that was just the kit I had. You'll have to let us know the verdict when you start yours.

I'm tackling the Airfix next so I'll let y'all know. Also, Eduard is going to be doing their Emil line in 48th. Been plugging the new E-1 hard on Facebook this week. 

Hey, builds look great! While we are doing a sort of primer gallery I thought I would add. A 1/24 Trump G-6 Hartmann along side a Hartmann G-6 1/48 Academy:

Geof

Hey, builds look great! While we are doing a sort of primer gallery I thought I would add. A 1/24 Trump G-6 Hartmann along side a Hartmann G-6 1/48 Academy:

When are you going to take the 1/24 out to fly?? That thing is huge!! 

i want to start on my G-10 but school is overwhelming me. hope to get some work done on sunday.