Fw 190 Butcher Bird 2013 (extended to June 2014) Group Build

Bish

JOE RIX

Joe, I'll be a puttin' together a 1/72 Hasegawa FW190F-8. I have PE seatbelts already and a sweet AM decal sheet enroute. Thanks for getting this going Joe as I'm breaking ground on Luftwaffe aircraft here. Something that is long overdue for me.

                            Joe

 

Joe which decal sheet have you got coming. I've got the same kit and was to happy with the decals, so i got a set from Authentic Decals.

Bish - I too got the Authentic Decals F-8 set. 12 options on the sheet. I'm leaning towards one of the MTO schemes. Joe

Thanks guys. The decal sheet I have has decals for a few 190s, a Do 335, and a He 162. All have tweaked my interest.

Cheers

Tony

taxtp

I have some decals to do an FW 190A-8 in French Air Force markings, circa 1946. So there you have my entry.

Deviant Academy 1/72 FW 190A-8 in French Air Force markings, circa 1946.

Cheers

Tony

Thats gonna be an interesting build Tony, I keep forgetting that the fw190 remained in service with the french for a short while after the war. They also got to keep some Yak 3 and 9s. Woulda been an interesting fleet for a post-war air force.

I have some decals to do an FW 190A-8 in French Air Force markings, circa 1946. So there you have my entry.

Deviant Academy 1/72 FW 190A-8 in French Air Force markings, circa 1946.

Cheers

Tony

Rigidrider

Killer badge Ninetails...One of the best I've seen, Most all are cool but some just reach out and grab ya! This one grabs ya!   

Killer badge Ninetails...One of the best I've seen, Most all are cool but some just reach out and grab ya! This one grabs ya!   Mustang, you've already got the kit I'll start out with and by saturday I should be able to pare down the aircraft and paint ( I  hope) I think I told you but likely 2Jg1 or 3Jg26. Still checking for paint schemes and suplimental markings if I dont have them already. I think this is going to be a kick ass build!

Doug (RR)

wjt619

Hey, btw, how do you get the badge that you have on your sreen when you post?

Go to community settings, then inside 'signature' you post the '[IMG]' code of the image you want as a 'standard' below your posts,
just don't take a to big one because otherwise it might be annoying for others to scroll down the entire way

My badge are 100px (pixels) high and the badges I design and post for others are 150px, those should do the trick as it beeing readable but not annoying for others.

With regards, Ninetalis. 

Nice! What model are you building from Eduard? Yeah, mustang, Ive heard that the website helps too.

Hey, btw, how do you get the badge that you have on your sreen when you post?

fantacmet

The hard part is gona be figuring out the paint scheme I wanna go with.

The hard part is gona be figuring out the paint scheme I wanna go with.

JOE RIX

Joe, I'll be a puttin' together a 1/72 Hasegawa FW190F-8. I have PE seatbelts already and a sweet AM decal sheet enroute. Thanks for getting this going Joe as I'm breaking ground on Luftwaffe aircraft here. Something that is long overdue for me.

                            Joe

Joe which decal sheet have you got coming. I've got the same kit and was to happy with the decals, so i got a set from Authentic Decals.

Nathan T

...The Wurger stash...

...Hmmmm... Gonna do another Eduard D-9 for sure, probably the ta 152 along side

wjt619

OK, I am in with a FW-190A-5 in 1/48 from Eduard!

...The Wurger stash...

...Hmmmm... Gonna do another Eduard D-9 for sure, probably the ta 152 along side

OK, I am in with a FW-190A-5 in 1/48 from Eduard!

Thanks mustang! I really cant wait. this sounds like such a great thing!

Joe, I'll be a puttin' together a 1/72 Hasegawa FW190F-8. I have PE seatbelts already and a sweet AM decal sheet enroute. Thanks for getting this going Joe as I'm breaking ground on Luftwaffe aircraft here. Something that is long overdue for me.

                            Joe

Ninetalis

Haha, Thanks for the confidence guys!
I hope that I don't need to change another badge again.
Designing a badge is fun, redesigning a badge SUCKS *SS!!

Just for the reconfirming Mustang, I'm in with a 'something in 1/48', very sure it will be an A-8.
So put me down for an Fw 190 A-8 in 1/48 and my girlfriend with a
Eggplane Fw-190A from Hasegawa. (you can put her under my name)
I have been thinking a while to build a captured FW190 since it's VERY orange and not a difficult camo that is above my level, I've seen them decals around on some convensions and I'm going to the IPMS Belgium one this weekend, which is supposed to be one of the biggest ones around here.

Still don't know which kit, it will probable be the Tamiya, Italeri or Eduard FW 190 A-8.
With regards, Ninetalis. 

fantacmet

That badge is too pretty not to join up.  I may be biting off more than I can chew with all thse GB's but by start time I should have most of the others done.

Count me in for the Eduard D9 Dora Profipack.  The nice newish one.  I only have the interior started and nothing else.  I lost the control stick to the hardwood floor monster(my desk is a mess and so is the floor around it), shouldn't be too hard ot scratch/kitbash one together.

That badge is too pretty not to join up.  I may be biting off more than I can chew with all thse GB's but by start time I should have most of the others done.

Count me in for the Eduard D9 Dora Profipack.  The nice newish one.  I only have the interior started and nothing else.  I lost the control stick to the hardwood floor monster(my desk is a mess and so is the floor around it), shouldn't be too hard ot scratch/kitbash one together.

I'll commit.  You can go ahead and put down for that 1/48 Tamiya -F8 we talked about.

wjt619

Count me in, will post variant soon!

I'm in. Not sure with what yet. Outside of the P-47, the 190 is probably the best-represented subject in my stash (1 1/48 Hasegawa A-8, 3 1/48 Eduards, 2 1/32 Hasegawas and a Hobby Boss Ta 152...).

Professor, looking at the two PCM kits in the stash...  they look to be really nice, fun kits with all the goodies thrown in- think Eduard's ProfiPack or Royal Class boxings.   PE is by Eduard, decals by Cartograph, and the resin and plastic is done in the Czech Rep., so I'm guessing Eduard as well.  The molding, detail and engraving on the plastic parts is good and restrained, rivet-wise it looks like a Hasegawa sprue as opposed to Trumpeter or Tamiya.  

They look to be worth the extra $$, especially the Macchi C.202. if you can find one.

Ninetalis- awesome work on the badges!

Haha, Thanks for the confidence guys!
I hope that I don't need to change another badge again.
Designing a badge is fun, redesigning a badge SUCKS *SS!!

Just for the reconfirming Mustang, I'm in with a 'something in 1/48', very sure it will be an A-8.
So put me down for an Fw 190 A-8 in 1/48 and my girlfriend with a
Eggplane Fw-190A from Hasegawa. (you can put her under my name)
I have been thinking a while to build a captured FW190 since it's VERY orange and not a difficult camo that is above my level, I've seen them decals around on some convensions and I'm going to the IPMS Belgium one this weekend, which is supposed to be one of the biggest ones around here.

Still don't know which kit, it will probable be the Tamiya, Italeri or Eduard FW 190 A-8.
With regards, Ninetalis. 

I like the badges!! Again, count me in with the Tamiya 1/48 A3. Just got my decals, so I'll decide on an option soon and plan to start in January.

Count me in, will post variant soon!

Nice work on the badges Ninetalis!