SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

British Army Group Build 2020

61482 views
1206 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Sunday, May 3, 2020 2:21 PM

My first experience with plastic indie link track was the Academy Stuart.  I immediately developed a healthy dislike of assembly type tracks with end pin connectors.

The next US tank I built was Tamiya’s old Sherman Jumbo, which I was more than happy to use use the kit supplied rubber band tracks.

“Ya ya ya, unicorn papoi!”

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Sunday, May 3, 2020 2:17 PM

Those should be fun GreySnake.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, May 3, 2020 1:30 PM

Oh gosh, workable track links... good luck Greysnake.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    February 2011
Posted by GreySnake on Saturday, May 2, 2020 8:55 AM
AA, that is looking really good!
 
 
Gamera, thanks!
 
Real G, those two are looking really good.
 
 
The T41 tracks arrived yesterday. Going to be spending a lot of time cleaning as each track run is 158 parts if my math is correct.  

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, April 29, 2020 11:49 AM

Looks good Real G. 

Though the PIAT brings to mind a combat caulking gun. 

 

As Jeff Foxworthy would say 'If you've ever held up anyone with a caulking gun... you might be a redneck.' 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, April 28, 2020 12:55 PM

The PIAT soldiers on.

I worked on cleaning up the mold lines on the rounds yesterday.  Things look good on the PIAT and Enfield rifle after a coat of primer, so proper painting can commence.

“Ya ya ya, unicorn papoi!”

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, April 27, 2020 5:19 PM

Zvezda, Greysnake, AA, & 1961: Those look great guys!!! Super nice work! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2017
Posted by Armor_Aficionado on Monday, April 27, 2020 12:19 AM

Update - running gear done:

 

  • Member since
    February 2011
Posted by GreySnake on Sunday, April 26, 2020 5:44 PM
Thank you Bish.
 
AA like how the scheme turned out.
 
1961 looking good!
 
I’ve been moving along on the Sherman. Haven’t had any issues other than the somewhat vague instructions Dragon is famous for.
 
I’m at the point now where I’m going to have to stop on the kit for a week or so. I need to paint the lower hull first before attaching the sand shields and I’ll need the tracks I ordered first to do that. So I’m probably going to finish up adding items to the turret and stop. There’s some more parts to add to the upper hull but since a lot of them are fragile I’d prefer to put them on after gluing the upper and lower hull together.
  • Member since
    July 2008
Posted by Est.1961 on Sunday, April 26, 2020 3:11 PM

Very nice variety of modelling happening. I've being adding to and painting the Scammell. Next will make a start on the cab and flat bed. Progress so far. 

      " alt="" />

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Sunday, April 26, 2020 9:20 AM

Those are coming on nicely there guys. Good work on those gaps grey snake. AA, i am liking that scheme.

Zvezda, coming on well. I have had to do that with windscreens on a few 72nd kits.

Are you able to reduce the size of your images before you lad them. Not sure about other people, but for me they take ages to load. I have noticed your are around 4000px and was woundering if you could use imgur to make them smaller.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2017
Posted by Armor_Aficionado on Sunday, April 26, 2020 8:20 AM

WIP update: the camo scheme is done!  Used a Caunter scheme combo of Portland Stone (BSC64), Silver Grey (BSC28), and Dark Green (BSC34).

 

  • Member since
    February 2011
Posted by GreySnake on Saturday, April 25, 2020 9:31 AM
Zvezda , nice work!
 
 
AA, as I said in the Lockdown GB looking good!
 
Eagle, I really like how the Grant turned out. Great job!
 
Real G, looking good!
 
I’ve been working on my build on and off the past week. It’s about to start getting very hot during the day where I live so I’m getting all the outside work done.
In my previous post I said the turret had some fit issues and here’s what I’m working with.
Don’t have to worry about the rear of the turret as a storage bin covers that part. I did sand it down some just so the bin would fit flush.
 
This kit was bought second hand and the previous owner cut the turret out off the sprues rather roughly so there’s some filling to do where the turret was attached to the sprue.
 
 
Used putty to fix the gaps in the turret and after sanding here’s where I’m at. Think it’s taken care of. Of course I’m going to prime the model to make sure later on.
 
Got the bogies mounted on the lower hull. It was a lot easier then on the Firefly each one just snapped in.
 
Dragon did decide to throw me a major curve ball the tracks. They are way too long! Made sure it was nothing I did everything was mounted correctly.
 
The only thing I could think to do was cut off one link on the tracks and it seems to have somewhat fixed it. I can’t cut the tracks down anymore without losing the attachment points.
 
Miniart makes a set of workable T41 tracks and I’m just going to order them. I can’t think of a way to get the right tension in the Dragon tracks and if I just leave them as is the tank will look off sitting on the shelf.

 

  • Member since
    January 2013
  • From: Athens, Greece
Posted by Zvezda1980 on Saturday, April 25, 2020 2:48 AM

Small update on the small truck.

Cabin was assembled with some effort.

Tricky part was the fabrication of the windshield and windows from clear plastic. Once made and glued in place, they were masked with thinned Masking liquid from Gunze.

  • Member since
    January 2013
  • From: Athens, Greece
Posted by Zvezda1980 on Saturday, April 25, 2020 2:09 AM

Eagle, excellent build and painting. I like the dusty look.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, April 23, 2020 4:16 PM

Real, nice fix there and thats looking good.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, April 23, 2020 10:39 AM

Actually the penetration was pretty good from the PIAT bomb. It was superior to that of the WWII bazooka, and most panzerfausts. Accuracy on the other hand...

Hollow charge warheads rely upon their design shape, both diameter of charge and stand off distance for formation, for their penetration power. The projectiles velocity is not a factor. The angle at which it strikes the armor, and the fuse reliability are critical though.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Thursday, April 23, 2020 10:22 AM

stikpusher

 

 
Mopar Madness

I'm not familiar with the PIAT Neal.  Was/is that an anti-tank device like the Panzerfaust? 

 

 

 

Yes and no. Yes in that it launched a hollow charge projectile for use against armored vehicles. No in that there was no rocket on the projectile like on the panzerfaust or bazooka. Rather it was a spigot mortar type weapon with a firing spring in the launcher and a small charge inside the round. No launch backblast like on the aforementioned bazooka or panzerfaust, but it did have quite a recoil kick for the gunner.

 

But the penetrating power was inferior to other anti-tank rocket weapons, and the low velocity meant short range and poor accuracy.  I like to joke PIAT stood for Pretty Ineffective Army Toy (vice the actual Projector, Infantry, Anti-Tank).

Ugly little seams are being sanded out and small parts are being glued on.  Ditto for the Enfield rifle.  Will post pics when they get a coat of primer.

“Ya ya ya, unicorn papoi!”

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, April 23, 2020 10:00 AM

Mopar Madness

I'm not familiar with the PIAT Neal.  Was/is that an anti-tank device like the Panzerfaust? 

 

Yes and no. Yes in that it launched a hollow charge projectile for use against armored vehicles. No in that there was no rocket on the projectile like on the panzerfaust or bazooka. Rather it was a spigot mortar type weapon with a firing spring in the launcher and a small charge inside the round. No launch backblast like on the aforementioned bazooka or panzerfaust, but it did have quite a recoil kick for the gunner.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Thursday, April 23, 2020 9:51 AM

Mopar Madness

Excellent Grant, Bobby!

 

Thank you sir.  It was a fun build for sure.

 

 

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Thursday, April 23, 2020 9:50 AM

Bish

Nicely done there Bobby, next thing you will doing a diorama. I'll get the front page updated at the weekend.

 

Thank you sir!  And thank you for hosting an awesome GB!  Can't wait for the next one!!

 

 

  • Member since
    April 2015
Posted by Mopar Madness on Thursday, April 23, 2020 9:39 AM

I'm not familiar with the PIAT Neal.  Was/is that an anti-tank device like the Panzerfaust? 

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    April 2015
Posted by Mopar Madness on Thursday, April 23, 2020 9:36 AM

Excellent Grant, Bobby!

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, April 23, 2020 7:39 AM

Ohhh looks good Real G, like where you're going with this. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, April 23, 2020 5:19 AM

Nicely done there Bobby, next thing you will doing a diorama. I'll get the front page updated at the weekend.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Wednesday, April 22, 2020 6:56 PM

Gamera

That's a beautiful Grant! Proof of how you can make these older vintage Tamiya kits look great even today!! Heart

 

Thank you sir.  LOL!  Yeah, she showed her age, but still...a wonderful Tamiya kit.  You know there will be a Lee next to it at some point.  LOL!

 

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Wednesday, April 22, 2020 1:09 PM

I'm still moving along with the PIAT.  I had noticed early on that the rounds did not seat all the way into the launcher.  Maybe it's the scale factor with plastic wall thicknesses and such, maybe a dimension is just off.  Anyway, after mulling the problem and going through needlessly complicated fixes, I just shortened the stem of one round.  Since three rounds are provided, the remaining two can be displayed alongside the launcher.

As an aside, I rediscovered a tall bottle of Aeromaster grey primer in my drawer, and found the stuff better than my home brew filler.  It goes on smooth, dries terribly fast, and sands out better.  I stopped using it for an airbrush primer years ago because it produced a dead flat finish which consumed copious amounts of gloss to prep for decaling.  But as a fine seam filler it is excellent.

“Ya ya ya, unicorn papoi!”

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, April 22, 2020 10:44 AM

That's a beautiful Grant! Proof of how you can make these older vintage Tamiya kits look great even today!! Heart

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Tuesday, April 21, 2020 3:23 PM

Awesome work everyone.  What great builds and what a great GB!

Well, I know she has some flaws, but overall I think she turned out very nice!  Thanks again to Bish and Stik for the help with the commander. 

I didn't dirty her up too much.  Figured she be more dusty then caked on dirt.  Also, tried more "scratches" on the armor.  And after taking the pics, I thought I should do some sort of cord for the mic.  Embarrassed

It was a fun kit and I got some good practice with figures on this one.  Thanks again Bish for a rockin GB!  Enjoy.

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, April 20, 2020 12:05 PM

Zvezda & AA: Those are coming along great guys!! 

"I dream in fire but work in clay." -Arthur Machen

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.