SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

All Subjects - Aussie Group Build 2005

30259 views
1011 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Wednesday, February 9, 2005 11:21 PM
The 1:72 one in my sig is about 300mm long with a rotor span of 400mm. So halve that and we are still looking at a sizeable Rotodyne!

This would have been a revolution in short leg transportation if it was not crushed by British beaurocracy of the day. The US army and marines were ready to license produce (Kaman) it for operational use. Several airline companies were keen as well. So I just extended the facts a little to produce my QANTAS what-if. Essentially at time of it's cancellation the Rotodyne was ready fro production, all problems ironed out.

http://www.fortunecity.com/meltingpot/portland/971/Reviews/choppers/rotodyne_qantas.htm

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    August 2003
  • From: Alice Springs Australia
Posted by tweety1 on Wednesday, February 9, 2005 9:34 PM
Laugh [(-D]Laugh [(-D]
I guess everybody has a vice eh Mike.Wink [;)]

With me it's dodgy resin kits and near impossible camo schemesSigh [sigh]

But, exactly how big would a 1/144 Roto be???
--Sean-- If you are driving at the speed of light and you turn on the headlights, what happens???
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Wednesday, February 9, 2005 9:27 PM
QUOTE: Originally posted by tweety1

So, has anyone started their Aussie GB's yet?????????

I reckon I'll get into the Bell in about a week or so, should be fun, seeing as I ain't a helo fan.


Trust Mike to want a 1/144 Rotodyne!!




Well I am waiting for my kit and have got the decals already so after I get my two curent projects more advanced, I will make a start!

Oh yes, a 1:144 Rotodyne sitting next to my 1:144 ANSETT 737 would be the ducks guts Big Smile [:D]

My third Rotodyne is already planned. RAAF transport in one of the early experimental Caribou/Herc camo's the RAAF trialled. Wing tip fuel tanks and 5 bladed props...

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    August 2003
  • From: South Australia
Posted by South Aussie on Wednesday, February 9, 2005 6:17 PM
QUOTE: Originally posted by j.s.harrison

Mike thanks for the siteThumbs Up [tup]i'm waiting for the page to download now...........It's taking a while gotta get cable in the new houseThumbs Up [tup]
Good to see your Spit 8 is on it's way, can't have an Aussie GB without oneBig Smile [:D]

South i may be changing the livery on my Sabre, i'll probably be going for the Black diamonds, i'll look into it and get back to you........


Jules, without giving my age, I must say that I have seen this livery on a Sabre and it did look impressive.(Big Smile [:D]must have been impressive its an aircraft an I can remember it after all these years).
Wayne I enjoy getting older, especially when I consider the alternative.
  • Member since
    August 2003
  • From: Alice Springs Australia
Posted by tweety1 on Wednesday, February 9, 2005 8:39 AM
So, has anyone started their Aussie GB's yet?????????

I reckon I'll get into the Bell in about a week or so, should be fun, seeing as I ain't a helo fan.


Trust Mike to want a 1/144 Rotodyne!!

--Sean-- If you are driving at the speed of light and you turn on the headlights, what happens???
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Tuesday, February 8, 2005 6:12 PM
not OOB Jules... there are really no specific instructions as to which squadron they came from etc... I am going to look into AM decals for them...
---Tom--- O' brave new world, That has such people in it!
  • Member since
    November 2005
Posted by Anonymous on Monday, February 7, 2005 10:51 PM
QUOTE: Originally posted by tho9900

sure Jules! I take check or money order.. as soon as I recieve it I will take a pic of them for ya! lol!!

I gotta go to work in a minute but will snap what I already have tonight..

oh yeah Jules - when ya get that Wildcat for the Pearl Harbor build you'll definitely want to use some PE and such... and see if they have an ultracast seat as well... the interior on the kit is a little spartan...

No worries Tom i'll Tax the missuses credit card againTongue [:P]Black Eye [B)]Black Eye [B)]Black Eye [B)]
Hey are these wildcats from the YorktownQuestion [?]
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Monday, February 7, 2005 6:50 AM
sure Jules! I take check or money order.. as soon as I recieve it I will take a pic of them for ya! lol!!

I gotta go to work in a minute but will snap what I already have tonight..

oh yeah Jules - when ya get that Wildcat for the Pearl Harbor build you'll definitely want to use some PE and such... and see if they have an ultracast seat as well... the interior on the kit is a little spartan...
---Tom--- O' brave new world, That has such people in it!
  • Member since
    November 2005
Posted by Anonymous on Monday, February 7, 2005 2:43 AM
Thats pretty impressive for a 144 kit, must have one hell of a magnifying glass Thumbs Up [tup]

Tom how about a pic of all your Typhoon goodiesQuestion [?]
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Sunday, February 6, 2005 9:36 PM
You also know the Hunter is calling you too!!!

well, it did to me Smile [:)]

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    March 2003
  • From: Melbourne, Victoria
Posted by harvs73 on Sunday, February 6, 2005 8:32 PM
I have finally managed to start on the Mosquito PR16 again. I have achieved more yesterday that I had after a couple of weeks last year. All that resin was driving me crazy and I guess I just needed to have a break from it! The resin engines of the CMK conversion sure adds extra weight on to the kit, combined with all the rest of the resin it will be a very heavy model at the end of it. I should have a few photos on here hopefully today of my progress.

Dave Harvey

  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Sunday, February 6, 2005 5:03 PM
QUOTE: Originally posted by madmike

you know you need to buy them!!


I can't take the peer pressure!!! haha... I will probably pick one up next time I am at the hobby shop... I've been eyeing them anyway so I might as well break down and do it!!!

A drum roll if you please!!!! tonight I start on the Typhoon... I am 98% done on the Martlet and need to find mine, or buy some more antenna wire... the SBD just got futured over most of the decals and the one straggler just got more microsol as it was silvering... then it is the prop, bombs, dive flaps and canopy and I am done with it! (of course it is waiting on antenna wire as well)

hoping this Hasegawa kit is a good build! and can't wait to break out that ultracast seat out!!
---Tom--- O' brave new world, That has such people in it!
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Saturday, February 5, 2005 9:48 PM
they do get addictive, I have a growing section of my stash dedicated to them. The Revell 1:144 Hunter is sublime and even the limited run Ozmods kits of the Panther and Sabre are fantastic....

They are cheap too Smile [:)]

you know you need to buy them!!

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Saturday, February 5, 2005 8:59 PM
ok I had to wait to reply to this Mike... I got it out of my system! I have too many builds as it is and I think if I started doing the 1/144 thing I might get hooked hahah... as it is the few 1/72 kits have me scared so maybe it's for the best!!!
---Tom--- O' brave new world, That has such people in it!
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Saturday, February 5, 2005 5:18 AM
I wonder if Revell will do a 1:144 Fairey Rotodyne??

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Friday, February 4, 2005 7:25 PM
curse you Mike!!! you had to tell me about that... now I have to check that one out too hahaha...

got my Typhoon in today, along with the ultracast seats... VERY nice quality!!! I can see this will be an ongoing thing to use those seats... much better than any resin cockpit kit seats I have seen yet! also got the decals and the paint so all that is holding me up is the Martlet from the BoB build, and a few bits on the SBD for the US Naval Aviation GB... then WOOOHOOOO!!!!

Nice looking kit with some nice exterior detail... didn't look hard at the interior but at least it had dials on the IP instead of flat with a decal for it! might go ahead and buy the PE tomorrow as well when I order the filter for it as with that canopy (car door style) you should be able to see inside fairly well...

hopefully tomorrow I will at least be able to take the pieces out of the box and test fit them!!!
---Tom--- O' brave new world, That has such people in it!
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Friday, February 4, 2005 5:22 PM
I am targetting the new Revell 1:144 Hawkeye kit, very nice in the box!

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Friday, February 4, 2005 8:28 AM
wow!! something I couldn't tackle in my advanced years here.. Wink [;)] I'll stick to my 1/48 and be happy with it!

(fighting off urge to buy 1/144 kit this weekend)
---Tom--- O' brave new world, That has such people in it!
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Friday, February 4, 2005 5:05 AM
pretty impressive, isn't it???

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    August 2003
  • From: Alice Springs Australia
Posted by tweety1 on Friday, February 4, 2005 4:01 AM
Ok, I'd like to know the age of this guy doing the 1/144 kit??
Being the size of a cotton bud, I couldn't see it let alone detail it!!
--Sean-- If you are driving at the speed of light and you turn on the headlights, what happens???
  • Member since
    September 2004
  • From: Australia
Posted by Bandha Boy on Friday, February 4, 2005 1:59 AM
Mad! But then I have an aunt who has painted a portrait on a grain of rice.
Carl
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Friday, February 4, 2005 12:34 AM
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Thursday, February 3, 2005 9:10 PM
hmm whats the address of that Mike? wouldnt mind checking that out....
---Tom--- O' brave new world, That has such people in it!
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Thursday, February 3, 2005 9:09 PM
The beauty of a Sabre in 1:144 is that it is an overall NM finish and thus pretty simple to apply. The canopy is one piece IIRC, so the only detail change is removal of the top and bottom gun troughs. At the scale it is, that is all that is needed to make it a CAC Sabre.

You should see some of the progress builds in 1:144 on Aircraft Resource Centre. One bloke is adding full detail to a 1:144 F-5E Tiger II, amazing stuff!

cheers

Mike

"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Thursday, February 3, 2005 7:48 PM
Carl, thats funny... I am glad I heard that as I was very tempted to get a 1/144 kit the other day.. albeit it was a PBY so it wouldnt have been REAL small... but still. I might have been more tempted to try and add to it...

I got the decals and paint for the Typhoon today from squadron... which means the kit should be here in a day or two from great models... (they always take longer to ship than squadron for some unknown reason... bigger selection though which is a plus) I also got another Wildcat to do a Martlet Mk.3 from N Africa for the N Africa build... funny, first I really knew about the Martlet was the BoB GB... now I am finding more and more reference to them...
---Tom--- O' brave new world, That has such people in it!
  • Member since
    September 2004
  • From: Australia
Posted by Bandha Boy on Thursday, February 3, 2005 2:32 AM
1:144 has to be some sort of S&M process. I was buying something cheap to practice on (when my new airbrush eventually arrives) & picked up an A-10, thinking it was 1:72. Got home to find my first 1:144. I promised I'd keep it rough as the idea is to use it as a paint mule, but I always get sucked in & start fiddling. At that scale you either go mental getting into the detail or else find it much easier to leave things be (I'm still finding out just where I'll fall).
Carl
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Thursday, February 3, 2005 1:52 AM
Jules

cheers mate, glad to help and thanks again for your kind offer!

I have another project in mind to add some flavour to my entries in the GB. Just need to visit my decal supplier and pick them up...How does a Trumpy 1:144 F-86F-30 converted to a CAC Sabre sound?

At 1:144 only the gun arrangement would need to be changed!

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    November 2005
Posted by Anonymous on Thursday, February 3, 2005 12:51 AM
Mike thanks for the siteThumbs Up [tup]i'm waiting for the page to download now...........It's taking a while gotta get cable in the new houseThumbs Up [tup]
Good to see your Spit 8 is on it's way, can't have an Aussie GB without oneBig Smile [:D]

South i may be changing the livery on my Sabre, i'll probably be going for the Black diamonds, i'll look into it and get back to you........
  • Member since
    August 2003
  • From: South Australia
Posted by South Aussie on Wednesday, February 2, 2005 11:07 PM
Tom, I will update the group build list to show that you are building a Typhoon.

Mike, glad to hear that your Spitfire is on the way, with luck I will have my Hudson early next week.

To group build members don't forget to keep us all informed with progress reports of your builds.
Wayne I enjoy getting older, especially when I consider the alternative.
  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Tuesday, February 1, 2005 10:47 PM
good news, apparently my Hase 1:72 Spitfire VIII is on the way..

Thanks to all those who offered help!

cheers

Mike
"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.