The In My Stash GB

Paul, great start on the pit!

Bear, a Lab that retrieves plastic?  Awesome!   I had a black Lab as a lad, used to go for walks in the bush with me all the time, liked to chase the jack rabbits even though he didn't have a hope in hades of ever catching one.  He got full marks for enthusiasm though

Wish I had some progress to report but work has me burnt out by the end of the day and the parents are here for an extended stay so not much happening at the moment.

May God be with you and yours Kenny and may justice swiftly.

Eric

Josh & Paul Nice work on your cockpit parts looks good.

Status report: Finished sanding & scraping the main gears they're ready for paint when the temp warms up, the nose gear is almost finished.  As for the fuselage I still have a couple of spots that need putty then it should be ready for a wash & primer.  Now the fun part (not) removal of the ejector pin marks from the pylons & gear doors and rescribing of the detail.  On a happy note the score in this build is Bear 2 Carpet Monsters 0, I sent a couple of bits flying and was sure I'd lost them however with the assistance of my trusty Labrador Zoe we were able to rescue the nose gear doors from the jaws of the evil carpet monsters Thats it for now.

Cheers

Bear

DanCooper wrote:

Guys, is it ok for me to move the Apache to the "Once I'll see what I can to save it"-stash and move to the second most voted for subject ?

Don't see a problem Dan. Your second choice was the 1:144 Trumpeter USS Gato-class submarine wasn't it?

DanCooper wrote:

Guys, is it ok for me to move the Apache to the "Once I'll see what I can to save it"-stash and move to the second most voted for subject ? At the moment I've tried to remove the cheeck to repair the landinggear, resulting in an ugly damage on the fuselage

That blows Dan....... i don't see any problems with it. I guess it make sense to take the 2nd highest one on the list.

paul_toz wrote:

Josh - thanks for the link, lots of good info there. Here's what i have done so far... This is what I started with...  Here's what was in the Verlinden resin set... It consists of a new cockpit with the instrument panel having more depth to it making it easier to paint. No throttles though so I used the ones frmo the kit. The seats have moulded in harnesses which were completely missing from the kit. There are cockpit sidewalls which have a bit more detail than the kits as well. Also an engine and gun bay with cover panels and exhaust shrouds and a few other little bits. The joystick was broken in the resin set so I will use the kit one. Overall, the Verlinden set adds a little more detail in the cockpit, but the kit is pretty good anyways. The bonus for the resin is the engine and gun bay. Here's the cockipt and some other bits. The paints are Lifecolour RLM66 with Tamiya red, white & yellow. It's had some drybrushing and a black wash and then a little bit of umber wash on the floor. Questions: What's the best way to cut a panel out of the side to make way for the gun bay & engine? I have thought of either scribing, using a dremel with a circular cutter or chain drilling and then filling flat. What's the best way to remove interior detail - dremel? Thanks...Paul

Looking good Paul.     I don't know what would be the best way, but if you use a Dremel tool, be sure the speed is not too fast or you will melt something.   I found that the hard way while cleaning my return rollers......

Guys, is it ok for me to move the Apache to the "Once I'll see what I can to save it"-stash and move to the second most voted for subject ?

At the moment I've tried to remove the cheeck to repair the landinggear, resulting in an ugly damage on the fuselage

Josh - thanks for the link, lots of good info there.

Here's what i have done so far...

This is what I started with...

 Here's what was in the Verlinden resin set...

It consists of a new cockpit with the instrument panel having more depth to it making it easier to paint. No throttles though so I used the ones frmo the kit. The seats have moulded in harnesses which were completely missing from the kit. There are cockpit sidewalls which have a bit more detail than the kits as well. Also an engine and gun bay with cover panels and exhaust shrouds and a few other little bits. The joystick was broken in the resin set so I will use the kit one. Overall, the Verlinden set adds a little more detail in the cockpit, but the kit is pretty good anyways. The bonus for the resin is the engine and gun bay.

Here's the cockipt and some other bits.

The paints are Lifecolour RLM66 with Tamiya red, white & yellow. It's had some drybrushing and a black wash and then a little bit of umber wash on the floor.

Questions:

1. What's the best way to cut a panel out of the side to make way for the gun bay & engine? I have thought of either scribing, using a dremel with a circular cutter or chain drilling and then filling flat.
   
2. What's the best way to remove interior detail - dremel?

Paul-

Here is the link to the ejection seat site. It is really amazing! Thanks for the kind words fellas, I am really trying to get this build on the road before my trip to the sand box..... but on the other hand I really like this aircraft ( I was secretly hoping to build it for this build). I will see what else I can homebuild for this thing.  Enjoy, JOSH

http://www.ejectionsite.com/frame_sg.htm

Kenny,

I offer my condolences to you and your family.  I shall add you to my prayer list.  My problems become petty when someone else has suffered a true tragedy. 

Kenny,

As with everyone else, I offer my condolences.

Josh,

That ejection seat you built is one nice piece of work. 

Looks like an improvement to me Josh. Nice job, keep up the good work. What was the website that specialises in ejection seats?

Paul 

Kenny as with the rest of the fellas......I hang my head. Crazy world we live in my friends.

Well, some ok news. I started on the 162. My first major sugery of the build was the ejection seat. The stock seat in the kit is molded onto the rear cockpit bulkhead. That just won't do. I found a site out there that specializes in ejection seats and their history. Key for me was...plenty of photos! So I drank about 5 mountain dews and took to the bulkhead with a razor saw. As I said earlier I wanted this build to be scratch built. So filled the hole in the bulkhead with styrene, cut and reshaped the headrest with putty and styrene, rebuilt the back cushion and rear pan with the same, thinned down the bottom pan and bonded it to the back, and what would an ejection seat be with out proper guide rails. The only thing I wasn't able to make myself were the buckles on the seat belts, I took those from my parts box. Sooo that is what I have so far. The first photo shows the bulkhead on the sprue, the second is the seat. Let me know what ya think fellas..............JOSH

Kenny  My condolences to you and your wife, such terrible news I hope your wife is doing ok.

Take care

Bear

Sorry to hear that, Kenny, you and your family have my condolences...

As for my opdate on the build, I'm affraid it's more like a downdate, the left landingear has broken off, and because the attachement point are behind the avionics bay (that cheeck) I will need to find a way to remove that piece without damaging the fuselage too much, which will not be an easy task, in fact if I mess this up it will be the end of this chopper and the start on the number two voted kit in my stash. 

Condolences Kenny. I wish you and your family the best over the coming days and weeks.

Sincerest regards

Paul 

I started the kit last night. I already kinda build the same kit a few years ago (Tamiya Panzer IV D) and I know I might  encounter some fitting problems with the exhaust and muffler. I have to do something about the fit of the rear panel to the hull.......    it's just horrible and present in all Panzer IV based kits from Tamiya from the 70s.     The lack of details on the underside is bottering me as well. I took the pic from a Wirbelwind in CFB Borden.

The Tamiya offering is bare flat. I think it will be noticeable when the model will be viewed from the front. I have a few Italeri Panzer IV based kits that have good deatils, so I will try to replicate them on the Tamiya hull.

In other words, a nice challenge

kenny_conklin wrote:

Hey fellas sorry i havent been around for a bit a serious family tragedy happened this week in NYC. My wifes aunt was murdered so it may be a little while before i am back at the board. so dont worry not forgetting about you all just taking care of family business. kenny

Family first Kenny. Terrible news....... I hope the murderer will be caught and justice be done.

jlwilliams wrote:

Some questions for an experienced armor builder:  How do you straighten the vinyl tracks that have been warped due to being longer than the box?  What is the best glue to use on vinyl?  Do you glue the ends together before putting it on the wheels and sprockets?

I got the same kit. I would wait and see after the running gear is installed. Maybe the tension in the track will make it stay straight. If not, you can probably use a hair dryer to lightly soften the part where it's warped, and then twist in the different direction.

I would use super glue on those tracks.

WOW - My jaw is on the floor.

GOD be with you and your family, Kenny.

And may justice prevail.

Hey fellas sorry i havent been around for a bit a serious family tragedy happened this week in NYC. My wifes aunt was murdered so it may be a little while before i am back at the board. so dont worry not forgetting about you all just taking care of family business.

kenny