Messerschmitt BF109 GB 2012

Some very good detail photos there - thanks for the link.

VanceCrozier

70gtvert:

 

Wow! I can't say that I've ever seen anyone do that before! Where did you find the photo to work from for the covers? I've seen them before of course, but never at a good angle to try to duplicate...

I used the photo that is here: http://109lair.hobbyvista.com/index1024.htm  From here you click on the walkarounds tab, select the g series (the first set g1 through g5) The specific one is a G-2 #14753. Once your there you will see the one I used. There is enough there that I was able to cut off both ends and use the center in Photoshop. Then I cloned it to either size to get a larger section. Once that was complete I tried to size it to fit the wheel well. Looking at it now I may have gone a little small but since I still have the artwork I can enlarge it a little, may even do the current ones over.

VanceCrozier

70gtvert:

 

Wow! I can't say that I've ever seen anyone do that before! Where did you find the photo to work from for the covers? I've seen them before of course, but never at a good angle to try to duplicate...

I used the photo that is here: http://109lair.hobbyvista.com/index1024.htm  There is enough there that I was able to cut off both ends and use the center in Photoshop. Then I cloned it to either size to get a larger section. Once that was complete I tried to size it to fit the wheel well. Looking at it now I may have gone a little small but since I still have the artwork I can enlarge it a little, may even do the current ones over.

70gtvert

Wow! I can't say that I've ever seen anyone do that before! Where did you find the photo to work from for the covers? I've seen them before of course, but never at a good angle to try to duplicate...

Geof

Herman might just have to get over it! Which eduard kit are you referring to? I just started the engine and I am going to add a fuel rail. I noticed the directions are a litte off too with regard to versions. I'll post more on that later. So far this is a really cool looking little kit. Are you going to keep the tail stabilizer/strengthener tabs? Once again I've seen 4's with and without.

He will eventually,,  I went with the Eduard EU32268,,,, from the looks of it gives pretty good help with rounding the bays,, I'm not sure about the tabs as well,, the control surface "ribbing" is way too pronounced everywhere as far as I'm concerned,,,so I'm going to mellow that out a bit,,,Heres the instrument panel "pre" weathering.........................more to come,,,,love to see some pics Geof,,,,

70gtvert ,,,,,awsome looking bird!!!!!

[View:/themes/fsm/utility/:550:0]

 [View:/themes/fsm/utility/:550:0]

Herman might just have to get over it! Which eduard kit are you referring to? I just started the engine and I am going to add a fuel rail. I noticed the directions are a litte off too with regard to versions. I'll post more on that later. So far this is a really cool looking little kit. Are you going to keep the tail stabilizer/strengthener tabs? Once again I've seen 4's with and without.

Nice wheel bay detail there!

Got my wings repaired, like I said it only ruined the decals on top, so I only had to re-do the tops. Also added a couple of photos showing the scratch detail drop tank mount. I am not going to add the tank, but want it to look as if it could be at any moment or mission. The leather covers in the wheel wells I copied form a picture of a walkaround on a G4, copied it to photoshop, enhanced some of the colors and printed on clear decal paper (on a side not, is there anyone making a THIN clear decal material to print on? The stuff i got is as thick as a sheet of paper when applied and leaves a very distinctive step. I had to use this on one of my "no Step " decals.) Also with this one the weathering is going to be kept at a more subdued level than the last one.

This kit was a "parts kit" , one where I had scarfed the decals and canopy for another build. Ended up ordering aftermarket decals and a vacum formed E-4 canopy that I had to modify to look like the G-4 one. Thus this build was/is at a disadvantage. Today I pulled the trigger on a Eduard BF109E-3 Profipack that comes with all the things I like (wish I had those canopy masks with my first one). So, once this one is finished I will likely start on it. I've had no luck with Airfix supplying parts missing from my old 1/24 kit.

Geof

Alright gang, been doing some research on the F-2/4 trop I'm going to be doing. It seems there is some crossover in the wheel well thing. Ive seen a couple of walkarounds of F-4 trops with squared off wheel wells and I've seen others with circular wells. All the G series have squared off wells. I don't have an underside shot of the specific aircraft I want to do so I'm torn. On one hand I'd like to keep this build without too many complications (rounding off squared wells) and just keep it squared or do I go with the fix?

We have the F-4 squared wheel bays as well ( Herman is plenty pissed at me ) I'm gonna try putting a dress on a pig and throw the Eduard "fix" on it along with some mods........ we will see..............

[View:/themes/fsm/utility/ 

:550:0]

pzl66

 

Hans von Hammer:

 

 

I don't have an underside shot of the specific aircraft I want to do so I'm torn.

 

Do what I do when this is an issue...

Fasten it permanently to the base...

 

 

Diorama time!

Fortunately I was already in that mode! Round wheel wells or not!

Hans von Hammer

 

I don't have an underside shot of the specific aircraft I want to do so I'm torn.

 

Do what I do when this is an issue...

Fasten it permanently to the base...

Diorama time!

I don't have an underside shot of the specific aircraft I want to do so I'm torn.

Do what I do when this is an issue...

Fasten it permanently to the base...

Alright gang, been doing some research on the F-2/4 trop I'm going to be doing. It seems there is some crossover in the wheel well thing. Ive seen a couple of walkarounds of F-4 trops with squared off wheel wells and I've seen others with circular wells. All the G series have squared off wells. I don't have an underside shot of the specific aircraft I want to do so I'm torn. On one hand I'd like to keep this build without too many complications (rounding off squared wells) and just keep it squared or do I go with the fix?

VanceCrozier

Hans von Hammer:

 

Tucohoward:

 

 

 

Ya gotta be sh*ttin' me...

 

I know, right?? All those -109 kits, and no Revell to be seen!! 

And not a Monogram E in the effin' DECK... What kinda Messerschmitt-freak misses THAT one?

'Course if there was, I'd be at his house...

(I think I see a couple Monogram ProModelers on the bottom, but those don't count do they??)

Nah.. They aren't Monogram kits anyway...

It's the Monogram pro modeler issue of the 1/32 hasegawa (sic?).Pretty basic kit, nothing special except for a pair of resin tires & wheels. The decals are from Eagle Cal and so far I give them a thumbs down for ease. Still don't understand why they lifted when I dull coated the wings. The fuselage didn't do that and the wings had an extra day to dry too. Overall I will give them a thumbs up for subject matter. John

70gtvert: What kit is that? Markings look right on!

handiabled

 

pzl66:

 

An update, not what I was planning on it being but Im just going to keep going with it. Was looking at doing it mostly white but then it would look too white for my liking. Still have alot of work on the paint.

 

Again Im doing a fictional paint scheme here so so obviously this will not be historicaly correct just something to my liking.

 

 

I give it a big thumbs up    (Herman just keeps pointing at stuff )

I like Herman, he's so focused!!!

pzl66

An update, not what I was planning on it being but Im just going to keep going with it. Was looking at doing it mostly white but then it would look too white for my liking. Still have alot of work on the paint.

 

Again Im doing a fictional paint scheme here so so obviously this will not be historicaly correct just something to my liking.

I give it a big thumbs up    (Herman just keeps pointing at stuff )

Hans von Hammer

 

Tucohoward:

 

 

 

Ya gotta be sh*ttin' me...

I know, right?? All those -109 kits, and no Revell to be seen!!  (I think I see a couple Monogram ProModelers on the bottom, but those don't count do they??)

An update, not what I was planning on it being but Im just going to keep going with it. Was looking at doing it mostly white but then it would look too white for my liking. Still have alot of work on the paint.

Again Im doing a fictional paint scheme here so so obviously this will not be historicaly correct just something to my liking.

70gtvert

Had both a couple of good days as well as bad days, depending on your perspective. Got the plane together, painted and decaled. Shot a coat of dullcoat on everything, fuselage A-okay, wings, oh no! For some reason the decals wrinkled and I had applied them first. Kinda luck in the sense I have spare wing decals but no those for the fuselage.

                                                           Looks terriffic!!

Tucohoward

Ya gotta be sh*ttin' me...

70gtvert

Had both a couple of good days as well as bad days, depending on your perspective. Got the plane together, painted and decaled. Shot a coat of dullcoat on everything, fuselage A-okay, wings, oh no! For some reason the decals wrinkled and I had applied them first. Kinda luck in the sense I have spare wing decals but no those for the fuselage.

Had both a couple of good days as well as bad days, depending on your perspective. Got the plane together, painted and decaled. Shot a coat of dullcoat on everything, fuselage A-okay, wings, oh no! For some reason the decals wrinkled and I had applied them first. Kinda luck in the sense I have spare wing decals but no those for the fuselage.

I think Herman looks a little angry about something, oh hold on, whats that Herman?

"Das motor ist verboten legen über boden!!"

So its supposed to be on an engine stand while working on it?

" Jawohl gruppe leiter!!!!!"

handiabled

 

Well here is Herman and my first update pics,,,,everything fits in the engine compartment with the cowls shut ( Thank God ) will be adding linkages and so on once its in place,,,,

 

[View:/themes/fsm/utility/:550:0]

 [View:/themes/fsm/utility/:550:0]

 

[View:/themes/fsm/utility/:550:0]

 

[View:/themes/fsm/utility/:550:0]

Herman looks a little pale, let the guy get some rest! Nice work on the Daimler.

wish my kit came with the motor... Looking good so far!

Well here is Herman and my first update pics,,,,everything fits in the engine compartment with the cowls shut ( Thank God ) will be adding linkages and so on once its in place,,,,

[View:/themes/fsm/utility/:550:0]

 [View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

[View:/themes/fsm/utility/:550:0]

Also, instrument panels and sometimes radio panels were RLM 66(not flat black or 02), while the rest of the interior was 02 on BoB aircraft

Thanks Jack, that's exactly what I needed... interesting read and very informative.

[/quote]

Thats a great place to look,,  try this link as well if you want,,,,