VanceCrozier

Hey P38 - this is what I was trying to explain with the "Hmmm, you could mask a large 229 area, switch the mottling from olive outside the area to brown etc inside the area..."

Could stencil or "hand script" 229 on some of the pieces...

ah.. I see..

humm.. possible...possible..

I was thinking,, making some of my mottles into the shape of 229.. ve shall see.....

Hey P38 - this is what I was trying to explain with the "Hmmm, you could mask a large 229 area, switch the mottling from olive outside the area to brown etc inside the area..."

didnt the US , allies, write in chalk or white paint, numbers indicating the order that captured AC were captured ? u could do a "handwritten" 229  on it ? ..

Manstein's revenge

 

For those MOHO's who are doing a "natural" unpainted plane in its original materials...

Is someone going for the varnished plywood look?!

"Hey look, it's a naked HO.................. 229 flying wing"

p38jl

 

( plotting in my feelbe mind,, a way to airbrush/mottle in a 229 somewhere in the camo.. in homage to our feerless inspiration ,,Jeffw..)

For those MOHO's who are doing a "natural" unpainted plane in its original materials, one could use a white prisma pencil and stencil "229" somewhere as if it is a factory marking...

Hmmm, you could mask a large 229 area, switch the mottling from olive outside the area to brown etc inside the area...

ooh - ooh - ooh - I've got it! Just use the green mottle all over, but use 229 little "mottles" to cover the area! Let me know how that one works for ya!!

umm.. no... lol..

I'll be doing the night fighter camo scheme.. mottled olive drab over light blue, with flat black undersurfaces..

( plotting in my feelbe mind,, a way to airbrush/mottle in a 229 somewhere in the camo.. in homage to our feerless inspiration ,,Jeffw..)

You're not going with the afore-mentioned rainbow dazzle scheme are you?

ok,, after a pleasant trip to the LHS... appropriate colors have been procured for my HO-229B..

...Now that puts a whole new, rainbow colored, paint job on things!...

DISCLAIMER: By no means do i want to be assosiated with the "other" lifestyle.... I do have a very nice partner of the female kind LOL....

I'm just a member of Manny's HOrten 229 Builders Alliance Group.....

Richard

VanceCrozier

fermis:

 

Vance, you are the man!!!

 

I expect a thorough verbal thrashing if it doesn't come together as planned...

fermis

 

Vance, you are the man!!!

Well, until this thing starts shaping up, I can only claim to be "planning to be the man"! I expect a thorough verbal thrashing - especially from this gang - if it doesn't come together as planned - that should be enough to drive me to the finish line...

kermit

HOMOJOBAG 229 reporting mein herr!

 Now that puts a whole new, rainbow colored, paint job on things!

Vance, you are the man!!!

Hey Kermit - the only tube structure I'm planning on this one is whatever is visible from the cockpit, the inner ribs are just going to be there to keep the proper shape.

VanceCrozier:

Impressive plans, i have to say!. Are you planning on using a tubestructure for the interior as did the original? Can't wait to see it taking shape!

Ok,.....

Just received my dragon version in the mail. Waited for two weeks (coming from china...) And man....they weren't kidding saying the revell one is based on this one. It's even ridiculously obvious!:

Especially this one is probably very familiar to the owners/ builders of the revell version:

Looking forward to cutting sprue on this one! But first my 1/72 one ofcourse. Just wanted to share these pics.

Richard

Gamera

Vance: very cool idea- Manny should give you extra credit for building a wooden aircraft out of wood.

Only question is I'd have went with a bigger scale- 1/48 or 1/32 simply because I think bigger parts would be easier to work with. Still your eyes and fingers are probably sharper than mine. 

Yup, I'm with you on the 1/48, larger parts would have been easier to deal with, but I'm going small for 3 reasons.

1. I've got to put it somewhere when its done!
2. It's a pretty basic shape, really only wing ribs to deal with, so the small parts won't be too hard to deal with.
3. The spares box! Over the past 12+ years I've built mostly 1/72, including several Me262s and Me163s, so Ive got some cockpit pieces I can re-purpose. Also, a spare 1/48 main wheel from the spares will probably be about right for the nosewheel on this thing.

If it goes well I may try another in 1/48, using some aftermarket add-ons to flesh it out.

Well I was serious (and don't call me Shirley...) about wanting to scratch one of these MOHOs... a buddy of mine in high school built full-on flying models & I always enjoyed checking out his workbench.

After some digging I found what you see there for the inner assembly diagrams. No luck with the outer wing structure though, so I'll be, uhh, winging it. I think I'll take the outer most rib that I have a shape for, figure out how many I need to get to the tip & just keep reducing the master that I have until I have enough. The curves are pretty consistent so I should be able to pull it off. I think skinning it with thin sheet styrene is going to be simpler though, not enough flex with the balsa or basswood options. And I can scribe panel lines into the styrene. I think that combo means I'll need to grab some 2-part epoxy though.

Thoughts/suggestions from anyone will be welcomed!

Vance: very cool idea- Manny should give you extra credit for building a wooden aircraft out of wood.

Only question is I'd have went with a bigger scale- 1/48 or 1/32 simply because I think bigger parts would be easier to work with. Still your eyes and fingers are probably sharper than mine. 

VanceCrozier

Jahwol mein herr! Patience Feldmarschall, it takes time for the basswood to be grown, milled, cured and  delivered to me by a 1/72 driver & 8 tiny reindeer...

OK, here are the beginnings of "my kit"...

And just to keep Hammer happy, the basswood is American-grown & supplied by Revell - purchased with an infamous 40% coupon; the plans & instructions have been sourced from various online locations at no cost to myself; and all paperwork has been reduced to 1/72 scale and printed at my office!

Well Thunderbolt, I figure there needs to be some wood in it to keep true to the original!!

The plan (subject to change at any moment!) is to use the basswood for the ribs/runners etc, and skin it with sheet styrene, so I can scribe the panel lines more accurately. Kinda backwards I guess. Cockpit components & landing gear basics will come from the spares box. Canopy, uhhhh, thinking about trying to thermo-form some clear sheet over a form, will be tricky though.

The ever-benevolent Manny has given me some leeway considering I'm trying to scratch it.

To be honest... I'm very interested to see how this works too!

VC -- now that is ambitious! If you can scratch build it in wood, I think I can manage to stick a few bits of plastic together and dip it in paint!

Cheers, VERY interested to see how this works!

Mike/TB379

Jahwol mein herr! Patience Feldmarschall, it takes time for the basswood to be grown, milled, cured and  delivered to me by a 1/72 driver & 8 tiny reindeer...

OK, here are the beginnings of "my kit"...

And just to keep Hammer happy, the basswood is American-grown & supplied by Revell - purchased with an infamous 40% coupon; the plans & instructions have been sourced from various online locations at no cost to myself; and all paperwork has been reduced to 1/72 scale and printed at my office!

kermit

HOMOJOBAG 229 reporting mein herr!

Also.... The subject has been assembled und gefilled:

Aber ofcourse ze left wing cracked at ze seam once i was polishing ze subject... Is being dealt with as ve speak....

Richard

HOMOJOBAG 229 reporting mein herr!

Also.... The subject has been assembled und gefilled:

Aber ofcourse ze left wing cracked at ze seam once i was polishing ze subject... Is being dealt with as ve speak....

Richard

Manstein's revenge

If you MOJO's, HOHO's, HOJO's would build as much as you write we might have more WIP's in here...

...schnell---schnell!!!

You forgot "HOBAGS"...

If you MOJO's, HOHO's, HOJO's would build as much as you write we might have more WIP's in here...

...schnell---schnell!!!

VanceCrozier

 

p38jl:

 

Gamera:

...PS I thought about asking Manny to replace the term MOJOs with HOHOs considering the Christmas season. Then on second thought the idea of having Manny refering to me as his 'ho' is somewhat disturbing...

arn't we all..... Manny's Ho's... ??....

 

 

Manny's Hortens?

OK, in the bizarre world of the FSM forums.... I just received an email from one of the girls I work with - a very attractive young lady - reading (I kid you not)...

"If you can, I would really appreciate that.  You are the best!!!   Are you ready for HO-HO??"

I am suddenly concerned that my reply can and will be taken the wrong way. Suggestions? (Shouyld this post be moved to the illustrious 229 thread??)

LMAO

Just trying to be funny... Hell i'm not even building a revell 1/72 Horten right now...at this very moment.....not even filling seams on it or planning the paint job... I deny everything. What's a HOBAG anyways??

Richard (<---alledged HOBAG)

VanceCrozier

kermit, I'm not sure HOBAGS sounds any better than HOs!?

I knew this HOBAG once.....mmmmm, but that's a story for another time......